American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

15-Amp Router: Above-the-Table Adjustability Agawam MA

Freud’s 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

The Home Depot
(413)731-9700
179 Dagget Drive
West Springfield, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Connecticut Wood Group's Hardwood Outlet
(860) 253-0444
18 Mullen Road
Enfield, CT

Data Provided by:
The Home Depot
(413)564-0680
514 East Main Street
Westfield, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Brightwood True Value Hardware
(413) 567-0611
794 Williams St
Longmeadow, MA
 
Woodcraft - West Springfield
(413) 827-0244
239A Memorial Ave
West Springfield, MA

Data Provided by:
The Home Depot
(413)593-5400
655 Memorial Drive
Chicopee, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Bad Dogs Burl Source
(413) 213-0248
26 Barton Ave
Belchertown, MA

Data Provided by:
Kakley True Value Home Center
(413) 781-6110
10 Allen St # 185
Springfield, MA
 
Data Provided by:

15-Amp Router: Above-the-Table Adjustability

15-Amp Router: Above-The-Table Adjustability

Typically, it’s difficult to use a plunge router in a router table.  That’s because you often need to remove the router from the table in order to change bits. Setting the bit’s height requires fighting the plunge springs while pushing the motor to the correct bit depth. Freud’s new 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

In addition to its easy above-the-table use, the FT3000 has a micro-adjust dial that makes it easy to fine tune bit depth in 1/128-in. increments. This machine has variable speed (8,000-21,000 rpm) and, like many variable speed routers, soft start and electronic speed control. Variable speed is especially important when you use large diameter bits in a router table. It comes with both 1/4-in. and 1/2-in. collets, and a dust port for handheld routing. The height adjustment knob required for making adjustments from above the table is included with the machine.

Click here to read the rest of the article from American Woodworker