American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

15-Amp Router: Above-the-Table Adjustability Blackfoot ID

Freud’s 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

Fastenal- Idaho Falls
208-542-6008
4003 Professional Way Suite A Idaho Falls, ID, 83402
Idaho Falls, ID
 
The Home Depot
(208)542-2520
2075 S Holmes Ave
Idaho Falls, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)737-0731
1650 Pole Line Rd E
Twin Falls, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Boise, ID
(208) 338-1190
6883 West Overland Road
Boise, ID

Data Provided by:
The Home Depot
(208)263-2373
500 Kootenai Cut-Off Rd
Ponderay, ID
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)743-5097
2425 Thain Grade
Lewiston, ID
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)388-8500
3639 E Federal Way
Boise, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)887-9699
1100 S Progress
Meridian, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)637-1008
4340 Hawthorne Rd
Chubbuck, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)676-1441
220 W Kathleen Ave
Coeur d'Alene, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

15-Amp Router: Above-the-Table Adjustability

15-Amp Router: Above-The-Table Adjustability

Typically, it’s difficult to use a plunge router in a router table.  That’s because you often need to remove the router from the table in order to change bits. Setting the bit’s height requires fighting the plunge springs while pushing the motor to the correct bit depth. Freud’s new 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

In addition to its easy above-the-table use, the FT3000 has a micro-adjust dial that makes it easy to fine tune bit depth in 1/128-in. increments. This machine has variable speed (8,000-21,000 rpm) and, like many variable speed routers, soft start and electronic speed control. Variable speed is especially important when you use large diameter bits in a router table. It comes with both 1/4-in. and 1/2-in. collets, and a dust port for handheld routing. The height adjustment knob required for making adjustments from above the table is included with the machine.

Click here to read the rest of the article from American Woodworker