American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

15-Amp Router: Above-the-Table Adjustability Hopkins MN

Freud’s 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

Rockler Woodworking and Hardware #14
(952) 542-0111
12995 Ridgedale Dr.
Minnetonka, MN

Data Provided by:
The Home Depot
(952)512-0109
5800 Cedar Lake Rd
St Louis Park, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #81
(612) 822-3338
3025 Lyndale Avenue South
Minneapolis, MN

Data Provided by:
The Home Depot
(763)533-1200
6701 Boone Ave North
Brooklyn Park, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(952)496-3076
1701 County Road 18
Shakopee, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)509-9590
1705 Annapolis Lane
Plymouth, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(952)949-0982
13100 Valley View Rd
Eden Prairie, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(612)243-2400
6301 Richfield Pkwy
Richfield, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(612)782-9594
1520 New Brighton Blvd
Minneapolis, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(952)881-7020
400 W 79th St
Bloomington, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

15-Amp Router: Above-the-Table Adjustability

15-Amp Router: Above-The-Table Adjustability

Typically, it’s difficult to use a plunge router in a router table.  That’s because you often need to remove the router from the table in order to change bits. Setting the bit’s height requires fighting the plunge springs while pushing the motor to the correct bit depth. Freud’s new 15-amp FT3000VCE plunge router, $290, is a back-saving machine that allows you to make all your adjustments from above the table, from bit changes to height adjustments. Yes, other routers offer above-the-table adjustments, but most are smaller, 12-amp machines.

In addition to its easy above-the-table use, the FT3000 has a micro-adjust dial that makes it easy to fine tune bit depth in 1/128-in. increments. This machine has variable speed (8,000-21,000 rpm) and, like many variable speed routers, soft start and electronic speed control. Variable speed is especially important when you use large diameter bits in a router table. It comes with both 1/4-in. and 1/2-in. collets, and a dust port for handheld routing. The height adjustment knob required for making adjustments from above the table is included with the machine.

Click here to read the rest of the article from American Woodworker