American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

$2 Mallet Park City UT

My favorite chisel whacker comes from my hardware store's plumbing department. It's two pieces of malleable black pipe (not cast iron), a nipple and a reducing coupler, wrapped with a bicycle inner tube for a comfortable grip.

The Home Depot
(435)649-1467
1595 East Frontage Rd
Park City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)763-8640
885 W Grassland Drive
American Fork, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)461-4248
3398 S Highland Drive
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hdw at Olympus Hills
(801) 424-1414
3939 Wasatch Blvd
Salt Lake City, UT
 
Kmart 4159 / Cross Merch
(801) 266-4437
4670 S 900 East
Salt Lake Cit, UT
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

The Home Depot
(801)567-0700
1310 E Park Centre Dr
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Mortimer Lumber
810-987-3020
2307 Lapeer Ave Port Huron, MI, 84060
Port Huron, MI
 
Ace Hardware Lone Peak
(801) 763-2221
5353 W PARKWAY EAST ST
Highland, UT
 
Ace Hardware
(801) 364-6567
612 E 400 S
Salt Lake City, UT
 

$2 Mallet

$2 Mallet

My favorite chisel whacker comes from my hardware store’s plumbing department. It’s two pieces of malleable black pipe (not cast iron), a nipple and a reducing coupler, wrapped with a bicycle inner tube for a comfortable grip. It costs $2, which is far less than the price of a turned wooden mallet, weighs 24 oz., which offers plenty of mass, and stands on its head when you’re done. My handle is stout. You might find 3/4-in.  pipe easier to hold.

I prefer a round- to a flat-headed mallet because I don’t have to hold it so precisely. An iron or brass mallet like this is fine for durable plastic-handled chisels, but I use a lighter-weight wooden mallet on wood-handled carving tools.

The reducing coupler doesn’t come with a smooth surface, however. To sand off the seams and lip, I put 60-grit sandpaper on my disc sander, threaded the coupler on the nipple to make a handle and rotated the coupler against the sanding disc. For the wrapping, I cut an old inner tube 24 in. long and tapered one end. I tucked this end under the wrapping to secure it.

Click here to read the rest of the article from American Woodworker