American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

4 Proven Finishes for Oak Cody WY

The layered finishes start with a ground color of water-based dye. People like water-based dyes because they don’t bleed back out of oak’s pores like alcohol-based dyes do. Next, a barrier coat of dewaxed shellac seals in the dye.

Aldrich Home Center Of Cody
(307) 587-2263
308 19th Street
Cody, WY
 
Gambles
(307) 587-4461
1007 12th Street
Cody, WY
 
Cody Ace Hardware
(307) 587-8555
2201 17th St, K-Mart and McDonald's
Cody, WY
 
The Home Depot
(307)362-3716
1925 Foothill Blvd
Rock Springs, WY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(307)632-2897
1740 Fleischli Pkwy
Cheyenne, WY
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 7:00am-8:00pm

Titan Truss
(307) 587-2187
2828 Chopper Lane
Cody, WY
 
Bloedorn Lumber Bldg Materials
(307) 587-2223
1902 Big Horn Ave
Cody, WY
 
Diamond Concrete Design
(307) 222-4730
721 15th Street, Suite A
Cody, WY
 
The Home Depot
(307)686-8128
1105 E Boxelder Road
Gillette, WY
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(307)674-6669
2050 Coffeen Avenue
Sheridan, WY
Hours
Mon-Sat: 7:00am-8:00pm
Sun: 8:00am-8:00pm

4 Proven Finishes for Oak

4 Proven Finishes for Oak

by Dave Munkittrick

A good finish should highlight the best characteristics of the wood it goes on. I’ve put together four finish recipes that make the most of oak’s contrasting grain. The first three recipes use two different color layers, each separated by a seal coat of shellac. Light penetrates and reflects back through the layers, giving these finishes stunning depth and beauty. The fourth is a simple, out-of-the-can recipe that produces a surprisingly good-looking finish. 

The layered finishes start with a ground color of water-based dye. I like water-based dyes because they don’t bleed back out of oak’s pores like alcohol-based dyes do. Next, a barrier coat of dewaxed shellac seals in the dye. Shellac dries fast, allowing you to move through the steps quickly. A second layer of color, called a glaze, is applied over the sealed dye. The dark glaze fills the open-pored earlywood, increasing its contrast with the light-colored latewood. I use a gel stain for the glaze because it doesn’t run all over or bleed back. Another coat of shellac seals in the glaze. The dewaxed shellac allows you to use your favorite topcoat. (Check out “Tips & Techniques for Fantastic Oak Finishes” .)

Mission Oak

This finish is designed specifically for quartersawn white oak. Sanding the dye coat ever so lightly really enhances the ray flecks. 

1. Apply a 50-50 mix of Trans Tint Dark Mission brown and medium brown dye to the bare wood and let it dry.

2. Very lightly scuff-sand the dyed wood with 320-grit paper. 

3. Seal the dye with a barrier coat of wax-free shellac. 

4. Scuff-sand.

5. Glaze with Minwax walnut gel stain.

6. Seal with wax-free shellac and scuff-sand when dry.

7. Apply a topcoat of your choice.


Golden Oak

This is a classic oak finish familiar to any antique lover. The glaze layer darkens the open-pored earlywood and contrasts beautifully with the brownish-gold latewood. This finish looks best on red oak.

1. Apply J.E. Moser’s Wizard Tints honey amber dye to the bare wood and let it dry.

2. Seal with shellac and scuff-sand when dry.

3. Glaze with Minwax walnut gel stain.

4. Seal with shellac and scuff-sand when dry.

5. Apply a topcoat of your choice.


Deep, Dark, Red Oak

This finish looks great on plainsawn red oak boards and  is impossible to get straight out of a can. The red dye is incredibly strong. But the gel stain is applied without a barrier coat so it darkens both the earlywood and latewood.

1. Apply J.E. Moser’s Wizard Tints bright scarlet to the bare wood and let it dry.

2. Apply Minwax jet black mahogany gel stain. 

3. Seal with wax-free shellac and scuff-sand when dry.

4. Apply a topcoat of your choice.


Simple, But Nice, Oak Finish

This finish is as easy as it gets. Its results are not as spectacular as those of the othe...

Click here to read the rest of the article from American Woodworker