American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

6 Storage Tips Bogalusa LA

This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them.

The Home Depot
(601)749-2180
2000 Hwy 43 South
Picayune, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Phillips Do it Best Bldg Suppl
(601) 798-8611
2217 N Hwy 11
Picayune, MS
 
Hooker's Ace Hdw
(601) 798-4445
6422 Hwy 11 N
Picayune, MS
 
3300 Highway 11 N
(601) 798-4701
Ste B
Picayune, MS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

The Home Depot
(504)464-9200
2625 Veterans Blvd
Kenner, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Bogalusa - Auth Hometown
(985) 732-3641
412 Avenue B
Bogalusa, LA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17

Knights Ace Hardware
(601) 795-4177
1312 S Main St
Poplarville, MS
 
Knight's Ace Hardware
(985) 839-3531
1107 Washington St
Franklinton, LA
 
Quick & Grice Ace Hardware
(601) 798-4851
1007 Highway 11 S
Picayune, MS
 
The Home Depot
(504)246-4572
12300 I-10 Service Rd
New Orleans, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

6 Storage Tips

6 Storage Tips

1. Sandpaper Roll Storage
I use pressure-sensitive-adhesive (PSA) sanding discs. For easyaccess, I like to get them out of their packages and lined up by grit.I hang my rolls of sanding discs on horizontally supported dowels so Ican quickly grab the right grit without looking at the back side of adisc.



2. Eye-Level Bit Storage
Lots of folks store router bits in wood blocks. I turned mine intopull-out blocks mounted at the bottom of my upper cabinets. The shelvespull out and hang at eye level while you find the bit you need. Eachpull-out block slides on a pan head screw captured in a routed keyholeslot on the bottom of the block (see inset). If you want to remove theblock and take your bits to where you're working, just lift the blockoff the screw and go. Rout the stopped keyhole slot in the center ofeach block. Drill a 1-in.-dia. x 1/2-in.-deep finger hole in the frontof each pull-out block. On this cabinet, I use filler blocks tomaintain clearance for the door hinges.


 

Source:
MLCS, (800) 533-9298, www.mlcswoodworking.com, Carbide-tipped keyhole-cutting bit, 3/8-in.-dia. x 1/4-in. shank, #5438, $9.

3. Easy-Adjust Drawer Dividers
I've tried lots of different drawer dividers over the years, butnone comes close to this system. Its beauty lies in its flexibility. Asmy storage needs change, so can my dividers—in an instant! Thesedividers are friction-fit against strips of 1/4-in.-thick closed-cellfoam. To make the foam inserts, cut pieces of 1/4-in.-thick fiberboardto fit across your drawer. Use spray adhesive to adhere 1/4-in.-thickclosed-cell foam to the fiberboard. Then set the dividers into yourdrawer, measuring the distance you need between them. The best way tofit the dividers is to start long and slowly trim their lengths untilthey fit snugly.



Sources:
A-1 Foam, (952) 253-1972, Dynaflex closed-cell foam, 1/4 in. thick,charcoal color, #XL2000, $1 per sq. ft. K-grip foam and fabric sprayadhesive, 13.25 oz., #701, $11.

Sears, (800) 349-4358, www.sears.com, Craftsman drawer liners, mesh roll, 21-3/4 in. x 256-1/2 in., #65190, $30 per roll.

4. Swing-Out Drill Bit Rack
This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them. The rack is 1-1/4in. thick by 3 in. wide with a 17/64-in. pivot hole. The rack pivots ona 1/4-in. bolt mounted through the bottom shelf with a lock nut andwasher. A rubber bumper acts as a stop. A couple of 1/8-in.-deep x1/2-in.-wide dovetail slots are routed on the front and back edges ofthe rack to hold labels.

 

5. Sandpaper Storage
Stored loose in a drawer, my sheet sandpaper curls like a potatochip, making it difficult to handle. This simple sandpaper storage traysolves the problem. The tray keeps an assortment of grits f...

Click here to read the rest of the article from American Woodworker