American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

6 Storage Tips Park City UT

This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them.

The Home Depot
(435)649-1467
1595 East Frontage Rd
Park City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)461-4248
3398 S Highland Drive
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hdw at Olympus Hills
(801) 424-1414
3939 Wasatch Blvd
Salt Lake City, UT
 
Kmart 4159 / Cross Merch
(801) 266-4437
4670 S 900 East
Salt Lake Cit, UT
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

The Home Depot
(801)567-0700
1310 E Park Centre Dr
Salt Lake City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(801)763-8640
885 W Grassland Drive
American Fork, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Mortimer Lumber
810-987-3020
2307 Lapeer Ave Port Huron, MI, 84060
Port Huron, MI
 
Ace Hardware Lone Peak
(801) 763-2221
5353 W PARKWAY EAST ST
Highland, UT
 
ABC Supply Co.,Inc/Murray
801-281-3232
5602 S. 300 West Murray, UT, 84107
Murray, UT
 

6 Storage Tips

6 Storage Tips

1. Sandpaper Roll Storage
I use pressure-sensitive-adhesive (PSA) sanding discs. For easyaccess, I like to get them out of their packages and lined up by grit.I hang my rolls of sanding discs on horizontally supported dowels so Ican quickly grab the right grit without looking at the back side of adisc.



2. Eye-Level Bit Storage
Lots of folks store router bits in wood blocks. I turned mine intopull-out blocks mounted at the bottom of my upper cabinets. The shelvespull out and hang at eye level while you find the bit you need. Eachpull-out block slides on a pan head screw captured in a routed keyholeslot on the bottom of the block (see inset). If you want to remove theblock and take your bits to where you're working, just lift the blockoff the screw and go. Rout the stopped keyhole slot in the center ofeach block. Drill a 1-in.-dia. x 1/2-in.-deep finger hole in the frontof each pull-out block. On this cabinet, I use filler blocks tomaintain clearance for the door hinges.


 

Source:
MLCS, (800) 533-9298, www.mlcswoodworking.com, Carbide-tipped keyhole-cutting bit, 3/8-in.-dia. x 1/4-in. shank, #5438, $9.

3. Easy-Adjust Drawer Dividers
I've tried lots of different drawer dividers over the years, butnone comes close to this system. Its beauty lies in its flexibility. Asmy storage needs change, so can my dividers—in an instant! Thesedividers are friction-fit against strips of 1/4-in.-thick closed-cellfoam. To make the foam inserts, cut pieces of 1/4-in.-thick fiberboardto fit across your drawer. Use spray adhesive to adhere 1/4-in.-thickclosed-cell foam to the fiberboard. Then set the dividers into yourdrawer, measuring the distance you need between them. The best way tofit the dividers is to start long and slowly trim their lengths untilthey fit snugly.



Sources:
A-1 Foam, (952) 253-1972, Dynaflex closed-cell foam, 1/4 in. thick,charcoal color, #XL2000, $1 per sq. ft. K-grip foam and fabric sprayadhesive, 13.25 oz., #701, $11.

Sears, (800) 349-4358, www.sears.com, Craftsman drawer liners, mesh roll, 21-3/4 in. x 256-1/2 in., #65190, $30 per roll.

4. Swing-Out Drill Bit Rack
This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them. The rack is 1-1/4in. thick by 3 in. wide with a 17/64-in. pivot hole. The rack pivots ona 1/4-in. bolt mounted through the bottom shelf with a lock nut andwasher. A rubber bumper acts as a stop. A couple of 1/8-in.-deep x1/2-in.-wide dovetail slots are routed on the front and back edges ofthe rack to hold labels.

 

5. Sandpaper Storage
Stored loose in a drawer, my sheet sandpaper curls like a potatochip, making it difficult to handle. This simple sandpaper storage traysolves the problem. The tray keeps an assortment of grits f...

Click here to read the rest of the article from American Woodworker