American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

6 Storage Tips Van Wert OH

This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them.

Fastenal- Van Wert
419-232-4350
529 Bonnewitz Avenue Van Wert, OH, 45891
Van Wert, OH
 
Lee's Ace Hardware
(419) 238-1546
647 W Ervin Rd
Van Wert, OH
 
Ottoville Do it center
(419) 453-3338
145 W 3rd Street
Ottoville, OH
 
Delphos Ace
(419) 692-0921
242 N Main St
Delphos, OH
 
Decatur Ace Hardware
(260) 724-3700
1220 S 13th St, Located on US 27, Across from Baymont Inn
Decatur, IN
 
Van Wert - Auth Hometown
(419) 232-4900
1159 S Shannon St
Van Wert, OH
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8.5-18
Tue:8.5-18
Wed:8.5-18
Thu:8.5-18
Fri:8.5-18
Sat:9-18
Sun:11-16
Store Features
Mon:8.5-18
Tue:8.5-18
Wed:8.5-18
Thu:8.5-18
Fri:8.5-18
Sat:9-18
Sun:11-16

Hall Do it Best Lumber
(419) 749-2119
122 S Main St
Convoy, OH
 
Tri County Do it center
(419) 692-6936
833 N Main St
Delphos, OH
 
Kmart 3664 / Cross Merch
(260) 728-2010
804 S 13Th St
Decatur, IN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Decatur True Value Hardware
(260) 724-9543
1480 Winchester Rd
Decatur, IN
 

6 Storage Tips

6 Storage Tips

1. Sandpaper Roll Storage
I use pressure-sensitive-adhesive (PSA) sanding discs. For easyaccess, I like to get them out of their packages and lined up by grit.I hang my rolls of sanding discs on horizontally supported dowels so Ican quickly grab the right grit without looking at the back side of adisc.



2. Eye-Level Bit Storage
Lots of folks store router bits in wood blocks. I turned mine intopull-out blocks mounted at the bottom of my upper cabinets. The shelvespull out and hang at eye level while you find the bit you need. Eachpull-out block slides on a pan head screw captured in a routed keyholeslot on the bottom of the block (see inset). If you want to remove theblock and take your bits to where you're working, just lift the blockoff the screw and go. Rout the stopped keyhole slot in the center ofeach block. Drill a 1-in.-dia. x 1/2-in.-deep finger hole in the frontof each pull-out block. On this cabinet, I use filler blocks tomaintain clearance for the door hinges.


 

Source:
MLCS, (800) 533-9298, www.mlcswoodworking.com, Carbide-tipped keyhole-cutting bit, 3/8-in.-dia. x 1/4-in. shank, #5438, $9.

3. Easy-Adjust Drawer Dividers
I've tried lots of different drawer dividers over the years, butnone comes close to this system. Its beauty lies in its flexibility. Asmy storage needs change, so can my dividers—in an instant! Thesedividers are friction-fit against strips of 1/4-in.-thick closed-cellfoam. To make the foam inserts, cut pieces of 1/4-in.-thick fiberboardto fit across your drawer. Use spray adhesive to adhere 1/4-in.-thickclosed-cell foam to the fiberboard. Then set the dividers into yourdrawer, measuring the distance you need between them. The best way tofit the dividers is to start long and slowly trim their lengths untilthey fit snugly.



Sources:
A-1 Foam, (952) 253-1972, Dynaflex closed-cell foam, 1/4 in. thick,charcoal color, #XL2000, $1 per sq. ft. K-grip foam and fabric sprayadhesive, 13.25 oz., #701, $11.

Sears, (800) 349-4358, www.sears.com, Craftsman drawer liners, mesh roll, 21-3/4 in. x 256-1/2 in., #65190, $30 per roll.

4. Swing-Out Drill Bit Rack
This swing-out drill bit rack means no more peering into a darkcabinet or trying to reach over a forest of sharp bits to get the oneway in back. Just swing out the block and all your drill accessoriesare right where you can easily and safely reach them. The rack is 1-1/4in. thick by 3 in. wide with a 17/64-in. pivot hole. The rack pivots ona 1/4-in. bolt mounted through the bottom shelf with a lock nut andwasher. A rubber bumper acts as a stop. A couple of 1/8-in.-deep x1/2-in.-wide dovetail slots are routed on the front and back edges ofthe rack to hold labels.

 

5. Sandpaper Storage
Stored loose in a drawer, my sheet sandpaper curls like a potatochip, making it difficult to handle. This simple sandpaper storage traysolves the problem. The tray keeps an assortment of grits f...

Click here to read the rest of the article from American Woodworker