American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

7 Trim Router Tips Bridgeton NJ

Trim router motors range from 3.8 to 7.5 amps and run at speeds as high as 30,000 rpm. Add a base and the trim router weighs between 3 and 4-1/2 lbs. All models use only a 1/4-in. collet. You can buy a variety of bases and accessories (see Sources, page 4). Prices range from $80 for just the router with a standard base to $250 for a kit with several accessories.

The Home Depot
(856)293-1155
3849 South Delsea Dr
Vineland, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

H & R Hardware & Garden Ctr
(856) 451-1090
8 - 16 Centerton Road
Bridgeton, NJ
 
Lowe's
(856) 327-7010
113 Bluebird Lane
Millville, NJ
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Hankins Hh & Bro Hardware
(856) 451-1215
12 Broad St W
Bridgeton, NJ

Data Provided by:
Alloway Village Hardware
(856) 935-6888
43 N Greenwich St
Alloway, NJ

Data Provided by:
H. H. Hankins Do it Best
(856) 451-1212
12 West Broad St
Bridgeton, NJ
 
Vineland - B
(856) 692-2000
8 W Landis Ave
Vineland, NJ
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9.5-21
Sun:11-18
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9.5-21
Sun:11-18

Warren's Do it Best
(856) 478-2600
110 Bridgeton Pike
Mullica Hill, NJ
 
Bostwick True Value Hardware
(800) 642-7392
Elmer & Center St
Elmer, NJ

Data Provided by:
I S Smick Lumber
(800) 642-7392
Rte 49 & Cottage Ave
Quinton, NJ

Data Provided by:
Data Provided by:

7 Trim Router Tips

7 Trim Router Tips



Laminate trim routers are amazing little machines. Their light weight and compact size make them exceptionally easy to use. Although they are designed primarily for trimming plastic laminate (p-lam), they also work great for light-duty wood routing.

Trim router motors range from 3.8 to 7.5 amps and run at speeds as high as 30,000 rpm. Add a base and the trim router weighs between 3 and 4-1/2 lbs. All models use only a 1/4-in. collet. You can buy a variety of bases and accessories (see Sources, page 4). Prices range from $80 for just the router with a standard base to $250 for a kit with several accessories.

Understanding what each of these accessories is capable of doing is the secret behind getting the most from your trim router. These accessories make the trim router very precise.

1. Protect the Plastic Laminate
Apply a lubricant, such as wax, soap or Trim Ease (a commercial product available from p-lam and trim bit distributors), to the plastic laminate's face when you use self-piloting bits. The lubricant protects the p-lam from burning or marring. Self-piloting bits are available in flush-trim or bevel-trim profiles. The flush trim (shown here) is used when you want to leave a flat, square corner. Its single cutting flute makes it fast-cutting. A solid carbide self-piloting trim bit costs $8 to $10, which is about half of what a ball-bearing-guided trimming bit costs. Ball-bearing-guided bits greatly reduce the risk of marring and can be used without a lubricant. The bearings do wear out, so you should replace them as soon as they show signs that they're not spinning freely. It's also important to keep them clean of built-up glue. Ball-bearing-guided trim bits are available in either a flush-trim or bevel-trim profile. The bevel profile (shown here) is used when you want to ease the edge to make it friendlier to the touch and reduce its chance of chipping when bumped. Ball-bearing-guided trim bits cost $12 to $24 each.# 3. Mar-Proof Routing
Use a ball-bearing guide attachment when you want to totally eliminate the chance of marring the finished surface or when you want to leave an overhang on the part that you are trimming. A nonpiloted trim bit is used with this guide. The bit is a combination flush and bevel cut. You can trim straight or curved surfaces with this setup.


4. Get a Super-Straight Cut
Use a straight guide when trimming against the substrate material. The straight guide bridges the small voids or gaps common in particleboard and plywood. The result is a straighter edge on the p-lam. This is important when another p-lam piece will be laminated to this edge. Straight edge guides do not work on curves or close in inside corners. A regular straight bit works fine with the straight guide.
5. Move Close into Corners

Click here to read the rest of the article from American Woodworker

Local Events

Philadelphia Flower Show 2018
Dates: 3/4/2018 – 3/11/2018
Location:
Pennsylvania Convention Center Philadelphia
View Details