American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Add Decorative Corner Splines Amherst MA

Decorative corner splines sure make an ordinary box look great. Butthey can be a bit dicey to cut on a tablesaw. Let your plate joinercome to the rescue. A simple jig holds the box and the joiner so youcan cut slots quickly with minimal setup hassles.

Architectural Timber & Millwork
(413) 586-3045
49 Mount Warner Road P.O. Box 719
Hadley, MA

Data Provided by:
Bad Dogs Burl Source
(413) 213-0248
26 Barton Ave
Belchertown, MA

Data Provided by:
Leon M Fiske Company, Inc. dba Forest Products Associates
(413) 772-6833
75 Oak Hill Rd.
Greenfield, MA

Data Provided by:
Amherst Farmers Supply
(413) 253-3436
320 South Pleasant St
Amherst, MA
 
Lowe's
(413) 588-0270
282 Russell Street
Hadley, MA
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

The Home Depot
(413)587-2790
350 Russell Street
Hadley, MA
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(413)593-5400
655 Memorial Drive
Chicopee, MA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(413)773-9150
264 Mohawk Trail - Rt 2
Greenfield, MA
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Leader Home Centers
(413) 253-3411
150 College St
Amherst, MA
 
Leader Home Centers
(413) 665-8884
16 Elm St
South Deerfield, MA
 
Data Provided by:

Add Decorative Corner Splines

Add Decorative Corner Splines

 

Decorative corner splines sure make an ordinary box look great. Butthey can be a bit dicey to cut on a tablesaw. Let your plate joinercome to the rescue. A simple jig holds the box and the joiner so youcan cut slots quickly with minimal setup hassles. The jig is nothingmore than a piece of scrap plywood with two wood strips set at 90degrees to each other. A cradle fits around the plate joiner base andkeeps it from rocking on the box corner. The cradle is indexed to thejig with a couple dowels. Use spacer blocks to adjust the splinespacing. Plunge the joiner into the wood slowly to prevent tear-outwhere the blade exits the wood. With this box, you only need one spacerblock; just flip the box over to cut the upper slot.


Click here to read the rest of the article from American Woodworker