American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Add Decorative Corner Splines Dunkirk NY

Decorative corner splines sure make an ordinary box look great. Butthey can be a bit dicey to cut on a tablesaw. Let your plate joinercome to the rescue. A simple jig holds the box and the joiner so youcan cut slots quickly with minimal setup hassles.

The Home Depot
(716)672-8200
3901 Vineyard Drive
Dunkirk, NY
Hours
Mon-Sat: 7:00am-10:00pm
Sun: 8:00am-8:00pm

Add Lumber True Value
(716) 366-1622
148 Willow Rd
Dunkirk, NY
 
Fredonia - Auth Hometown
(716) 672-2999
3725 E Main - Rte 20
Fredonia, NY
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16

Smiths True Value
(716) 934-4238
Route 5 & 20
Irving, NY
 
Frost Builders Supplies, Inc.
(716) 296-5695
Depot Street
Cherry Creek, NY
 
Fastenal- Dunkirk
716-366-3595
61-63 Lakeshore Dr Dunkirk, NY, 14048
Dunkirk, NY
 
Service Hardware True Value
(716) 366-5666
234 Lake Shore Dr E
Dunkirk, NY
 
Valu Home Center #20
(716) 673-1771
10378 Bennett Rd
Fredonia, NY
 
Valley Hardware Center
(716) 988-3304
524 Pine Street
South Dayton, NY
 
Mayville Hardware Inc
(716) 753-2621
53 South Erie Street
Mayville, NY
 

Add Decorative Corner Splines

Add Decorative Corner Splines

 

Decorative corner splines sure make an ordinary box look great. Butthey can be a bit dicey to cut on a tablesaw. Let your plate joinercome to the rescue. A simple jig holds the box and the joiner so youcan cut slots quickly with minimal setup hassles. The jig is nothingmore than a piece of scrap plywood with two wood strips set at 90degrees to each other. A cradle fits around the plate joiner base andkeeps it from rocking on the box corner. The cradle is indexed to thejig with a couple dowels. Use spacer blocks to adjust the splinespacing. Plunge the joiner into the wood slowly to prevent tear-outwhere the blade exits the wood. With this box, you only need one spacerblock; just flip the box over to cut the upper slot.


Click here to read the rest of the article from American Woodworker