American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Miter-Saw Stop Brattleboro VT

Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob.

The Home Depot
(413)773-9150
264 Mohawk Trail - Rt 2
Greenfield, MA
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Fireside True Value
(802) 254-4927
895 Putney Rd
Brattleboro, VT
 
W W Building Supply
(802) 365-4333
7 Loop Rd
Newfane, VT
 
Deerfield Valley Supply
(802) 464-3364
211 Route 9 W
Wilmington, VT
 
Keene - B
(603) 338-5000
480 West St
Keene, NH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19

Leon M Fiske Company, Inc. dba Forest Products Associates
(413) 772-6833
75 Oak Hill Rd.
Greenfield, MA

Data Provided by:
Leader Home Centers
(802) 257-7373
225 Marlboro Road
Brattleboro, VT
 
W W Building Supply
(802) 464-3022
Route 100
Wilmington, VT
 
Jacks True Value Hardware
(603) 352-1517
37 Park Ave.
Keene, NH
 
Leader Home Centers
(413) 774-6311
1123 Bernardston Rd
Greenfield, MA
 
Data Provided by:

Adjustable Miter-Saw Stop

Adjustable Miter-Saw Stop

 

This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp faces, this spacer makes the stop fit the fence perfectly. Sandpaper affixed to the stop's front face provides a secure grip. Glue the spacer and front clamp face together, making sure their edges are flush. Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob. I mounted the knob on the back face so it would be out of the way. The top's overhang keeps the back face from spinning as you tighten the knob.

Click here to read the rest of the article from American Woodworker