American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Miter-Saw Stop Brigham City UT

Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob.

The Home Depot
(801)393-0106
984 Wall Avenue
Ogden, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Ace Hardware
(435) 257-5034
250 E Main St
Tremonton, UT
 
Smith & Edwards Co Inc
(801) 731-1120
3936 N Highway 126, exit 351 off I-15
Ogden, UT
 
Lowe's of Ogden, UT
801-398-5460
344 N Washington Boulevard Ogden, UT, 84404
Ogden, UT
 
The Home Depot
(801)963-4700
4581 S 4000 W
West Valley City, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Greer's Do it Best Hardware
(435) 257-7749
28 West Main Street
Tremonton, UT
 
Lowe's
(801) 398-5460
344 N. Washington Boulevard
Ogden, UT
Hours
M-SA 6 am - 10 pm
SU 8 am - 9 pm

Wangsgards
(801) 393-8423
120 N Washington Blvd, 5 points in Ogden
Ogden, UT
 
The Home Depot
(801)393-0106
984 Wall Avenue
Ogden, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)292-0238
50 N Market Place Dr
Centerville, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Adjustable Miter-Saw Stop

Adjustable Miter-Saw Stop

 

This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp faces, this spacer makes the stop fit the fence perfectly. Sandpaper affixed to the stop's front face provides a secure grip. Glue the spacer and front clamp face together, making sure their edges are flush. Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob. I mounted the knob on the back face so it would be out of the way. The top's overhang keeps the back face from spinning as you tighten the knob.

Click here to read the rest of the article from American Woodworker