American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Miter-Saw Stop Fort Morgan CO

Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob.

Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
The Home Depot
(303)661-9600
1200 W Dillon Rd
Louisville, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
Collector's Specialty Woods (CSWoods)
(719) 746-2413
8055 County Road 570
Gardner, CO

Data Provided by:
The Home Depot
(720)870-8839
6000 South Gun Club Road
Aurora, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Adjustable Miter-Saw Stop

Adjustable Miter-Saw Stop

 

This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp faces, this spacer makes the stop fit the fence perfectly. Sandpaper affixed to the stop's front face provides a secure grip. Glue the spacer and front clamp face together, making sure their edges are flush. Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob. I mounted the knob on the back face so it would be out of the way. The top's overhang keeps the back face from spinning as you tighten the knob.

Click here to read the rest of the article from American Woodworker