American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Miter-Saw Stop Lewiston ME

Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob.

Drillen True Value
(207) 783-4600
1086 Sabattus St
Lewiston, ME
 
Handy True Value Hdw
(207) 345-2091
9 Depot Sq
Mechanic Falls, ME
 
Freeport True Value Hardware
(207) 865-9557
262 Us Rte 1 Ste 1
Freeport, ME
 
Gray True Value Hardware
(207) 657-3502
15 Main St
Gray, ME
 
K & G Auto & True Value Hardware
(207) 737-8383
65 Main St
Richmond, ME
 
Lowe's
(207) 514-2300
650 Turner Street
Auburn, ME
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

Northland True Value Hardware
(207) 225-6000
284 Ricker Hill Road
Turner, ME
 
Lowe's
(207) 373-7016
250 Bath Road
Brunswick, ME
Hours
M-SA 6 am - 9 pm
SU 8 am - 7 pm

Cooks Corner S/C
(207) 798-6051
8 Gurnet Rd
Brunswick, ME
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-18.5
Store Features
Mon:8-21
Tue:8-21
Wed:8-21
Thu:8-21
Fri:8-21
Sat:8-21
Sun:8-18.5

Casco Bay Home Improvement
(888) 373-5070
PO Box 1568
Lewiston, ME
 

Adjustable Miter-Saw Stop

Adjustable Miter-Saw Stop

 

This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp faces, this spacer makes the stop fit the fence perfectly. Sandpaper affixed to the stop's front face provides a secure grip. Glue the spacer and front clamp face together, making sure their edges are flush. Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob. I mounted the knob on the back face so it would be out of the way. The top's overhang keeps the back face from spinning as you tighten the knob.

Click here to read the rest of the article from American Woodworker