American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Miter-Saw Stop Sewickley PA

Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob.

The Home Depot
(412)367-7346
999 Ross Park Drive
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)494-2844
440 Home Dr
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(724)779-5180
25 Dutilh Rd
Cranberry Township, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)363-9150
400 N Highland Ave
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)835-4271
4000 Oxford Drive
Bethel Park, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #31
(412) 364-7751
7402 McKnight Road
Pittsburgh, PA

Data Provided by:
The Home Depot
(724)449-4440
4960 Route 8
Allison Park, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)220-2241
1025 Washington Pike
Bridgeville, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)824-9406
3550 William Penn Hwy
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(724)846-7990
2670 Constitution Blvd
Beaver Falls, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Adjustable Miter-Saw Stop

Adjustable Miter-Saw Stop

 

This handy stop grips tightly and is easy to adjust, so you can lock in crosscuts. A spacer the same thickness as the saw's auxiliary fence is the key. Sandwiched between the two clamp faces, this spacer makes the stop fit the fence perfectly. Sandpaper affixed to the stop's front face provides a secure grip. Glue the spacer and front clamp face together, making sure their edges are flush. Then glue on the plywood top. Align the back clamp face flush with the glued-up front assembly and drill a 1/4-in. hole through all three pieces. Glue sandpaper to the front clamp face. Install the carriage bolt, set it with a hammer and attach the knob. I mounted the knob on the back face so it would be out of the way. The top's overhang keeps the back face from spinning as you tighten the knob.

Click here to read the rest of the article from American Woodworker