American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Slot Rail and Stile Set Fort Morgan CO

The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick. Each two-piece matched set works like a stackable dado.

Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
Frank Paxton Lumber Company - Woodcrafter's Store
(303) 399-6047
4837 Jackson Street PO Box 16343
Denver, CO

Data Provided by:
Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
The Home Depot
(303)699-5006
5600 South Chambers Rd
Aurora, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)420-2498
7125 W 88th Ave
Westminster, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Adjustable Slot Rail and Stile Set

Adjustable Slot Rail and Stile Set

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove? It ain't pretty. It's a fact of life that plywood is undersized in thickness and this results in ugly gaps in doors with plywood panels. So here's the skinny—skinny bit, that is. With Amana Tools' new In-Stile and Rail System router bit set for $155, you can match the size of the groove to the exact size of the plywood. This allows easily custom fitting the groove to the panel. The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow making grooves (and the matching tongues) in two size ranges: from 0.197 in. to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to 0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts and trial and error to get the bit set up right, depending on your panel material's thickness, but instructions from Amana simplify the process. When you've found the perfect setup, using the bits is no different from using any other matched bit set. Sets are available in three profiles: ogee, bead and concave (pictured). All have 1/2-in. shanks and produce a 3/8-in.-long tongue. The price of each set is slightly higher than prices for matched sets that don't allow customizing the groove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Back to Well-Equipped Shop Index

Click here to read the rest of the article from American Woodworker