American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Slot Rail and Stile Set Gallup NM

The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick. Each two-piece matched set works like a stackable dado.

The Home Depot
(505)726-2362
530 Kachina Street
Gallup, NM
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

Gallup - Auth Hometown
(505) 863-9336
901 Metro Ave
Gallup, NM
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:12-17

The Home Depot
(575)492-9117
900 W Joe Harvey Blvd
Hobbs, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(505)899-1290
10200 Coors Dr NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(505)271-1900
200 Eubank Blvd SE
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Gallup Lumber & Ace Hardware
(505) 863-4475
1724 S 2nd St, Corner of Second Street & Nizhoni
Gallup, NM
 
Home Depot
(505) 424-9463
952 Richards Ave
Santa Fe, NM
 
The Home Depot
(505)833-9990
2820 Coors Blvd NW
Albuquerque, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(505)327-0710
3560 E Main Street
Farmington, NM
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(575)622-2026
2350 N Main
Roswell, NM
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Adjustable Slot Rail and Stile Set

Adjustable Slot Rail and Stile Set

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove? It ain't pretty. It's a fact of life that plywood is undersized in thickness and this results in ugly gaps in doors with plywood panels. So here's the skinny—skinny bit, that is. With Amana Tools' new In-Stile and Rail System router bit set for $155, you can match the size of the groove to the exact size of the plywood. This allows easily custom fitting the groove to the panel. The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow making grooves (and the matching tongues) in two size ranges: from 0.197 in. to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to 0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts and trial and error to get the bit set up right, depending on your panel material's thickness, but instructions from Amana simplify the process. When you've found the perfect setup, using the bits is no different from using any other matched bit set. Sets are available in three profiles: ogee, bead and concave (pictured). All have 1/2-in. shanks and produce a 3/8-in.-long tongue. The price of each set is slightly higher than prices for matched sets that don't allow customizing the groove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Back to Well-Equipped Shop Index

Click here to read the rest of the article from American Woodworker