American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Slot Rail and Stile Set Keene NH

The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick. Each two-piece matched set works like a stackable dado.

Jacks True Value Hardware
(603) 352-1517
37 Park Ave.
Keene, NH
 
W W Building Supply
(802) 365-4333
7 Loop Rd
Newfane, VT
 
Goosebay Sawmill & Lumber
(603) 798-5135
83 Dover Road Route 4
Chichester, NH

Data Provided by:
Rockler Woodworking and Hardware #34
(603) 898-5941
373 S. Broadway
Salem, NH

Data Provided by:
Woodcraft - Portsmouth, NH
(603) 433-6116
25 Fox Run Road
Newington, NH

Data Provided by:
Keene - B
(603) 338-5000
480 West St
Keene, NH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19

Best Septic
(802) 463-9444
153 Birchview Ext
Westminster, VT
Services Offered
Waste services, porta potty, jetting, portable toilet rentals, septic solutions, locating septic tanks, septic tank repair, septic tank cleaning, septic tank filters, septic tank services, snaking, camera service, septic trouble shooting, hand wash station rentals, septic design, septic installation, septic maintenance
Hours
24/7 Emergency Service

The Home Depot
(603)542-4471
425 Washington St
Claremont, NH
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Northland Forest Products, Inc.
(603) 642-3665
16 Church StreetPO Box 369
Kingston, NH

Data Provided by:
Rand's Hardware
(603) 536-1000
71 Main Street
Plymouth, NH
 
Data Provided by:

Adjustable Slot Rail and Stile Set

Adjustable Slot Rail and Stile Set

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove? It ain't pretty. It's a fact of life that plywood is undersized in thickness and this results in ugly gaps in doors with plywood panels. So here's the skinny—skinny bit, that is. With Amana Tools' new In-Stile and Rail System router bit set for $155, you can match the size of the groove to the exact size of the plywood. This allows easily custom fitting the groove to the panel. The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow making grooves (and the matching tongues) in two size ranges: from 0.197 in. to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to 0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts and trial and error to get the bit set up right, depending on your panel material's thickness, but instructions from Amana simplify the process. When you've found the perfect setup, using the bits is no different from using any other matched bit set. Sets are available in three profiles: ogee, bead and concave (pictured). All have 1/2-in. shanks and produce a 3/8-in.-long tongue. The price of each set is slightly higher than prices for matched sets that don't allow customizing the groove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Back to Well-Equipped Shop Index

Click here to read the rest of the article from American Woodworker