American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Slot Rail and Stile Set Kennesaw GA

The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick. Each two-piece matched set works like a stackable dado.

The Home Depot
(770)421-1245
1655 Shiloh Road NW
Kennesaw, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)917-8425
3355 Cobb Pkwy
Acworth, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)591-8663
9037 Hwy 92, Suite 100
Woodstock, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(678)567-1161
1062 Richard D Sailors
Powder Springs, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)439-0707
145 Depot Drive
Hiram, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)792-6858
2350 Dallas Hwy
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)971-2470
3605 Sandy Plains Rd
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)977-9700
4101 Roswell Rd
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)438-9678
1200 E W Connector SW
Austell, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)432-9930
2450 Cumberland Pkwy
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Adjustable Slot Rail and Stile Set

Adjustable Slot Rail and Stile Set

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove? It ain't pretty. It's a fact of life that plywood is undersized in thickness and this results in ugly gaps in doors with plywood panels. So here's the skinny—skinny bit, that is. With Amana Tools' new In-Stile and Rail System router bit set for $155, you can match the size of the groove to the exact size of the plywood. This allows easily custom fitting the groove to the panel. The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow making grooves (and the matching tongues) in two size ranges: from 0.197 in. to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to 0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts and trial and error to get the bit set up right, depending on your panel material's thickness, but instructions from Amana simplify the process. When you've found the perfect setup, using the bits is no different from using any other matched bit set. Sets are available in three profiles: ogee, bead and concave (pictured). All have 1/2-in. shanks and produce a 3/8-in.-long tongue. The price of each set is slightly higher than prices for matched sets that don't allow customizing the groove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Back to Well-Equipped Shop Index

Click here to read the rest of the article from American Woodworker