American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Slot Rail and Stile Set Orem UT

The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick. Each two-piece matched set works like a stackable dado.

The Home Depot
(801)226-2353
535 S Lindon Park Dr
Lindon, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)763-8640
885 W Grassland Drive
American Fork, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

TRANSWEST
(801) 225-8986
1590 W CENTER STREET, UNIT A OREM, UT, 84057
Orem, UT
 
Kmart 3096 / Cross Merch
(801) 224-0234
475 N State St
Orem, UT
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

White Cap- Orem
801-765-1440
555 South 1325 W Orem, UT, 84058
Orem, UT
 
The Home Depot
(801)418-1014
1550 S University Ave
Provo, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(801)619-6261
9570 S Highland Dr
Sandy, UT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

WASATCH BUILDING SUPPLY
(801) 798-9072
1049 N 140 E OREM, UT, 84057
Orem, UT
 
Timberline Woodworkers Supply
801-224-2260
1402 W Center Street Orem, UT, 84057
Orem, UT
 
Parley's Do it Best Hardware
(801) 822-5200
260 South 1200 West
Orem, UT
 

Adjustable Slot Rail and Stile Set

Adjustable Slot Rail and Stile Set

 

Have you ever slid a piece of 1/4-in. plywood into a 1/4-in. groove? It ain't pretty. It's a fact of life that plywood is undersized in thickness and this results in ugly gaps in doors with plywood panels. So here's the skinny—skinny bit, that is. With Amana Tools' new In-Stile and Rail System router bit set for $155, you can match the size of the groove to the exact size of the plywood. This allows easily custom fitting the groove to the panel. The set works for undersized 1/4-in. and 1/2-in. plywood in rail and stile material from 3/4 in. to 1-1/4 in. thick.
Each two-piece matched set works like a stackable dado.
It comes with a variety of shims, spacers and cutters that allow making grooves (and the matching tongues) in two size ranges: from 0.197 in. to 0.272 in. (approximately 3/16 in. to 9/32 in.) and 0.433 in. to 0.523 in. (approximately 7/16 in. to 17/32 in.). It takes test cuts and trial and error to get the bit set up right, depending on your panel material's thickness, but instructions from Amana simplify the process. When you've found the perfect setup, using the bits is no different from using any other matched bit set. Sets are available in three profiles: ogee, bead and concave (pictured). All have 1/2-in. shanks and produce a 3/8-in.-long tongue. The price of each set is slightly higher than prices for matched sets that don't allow customizing the groove size.

Source
Amana Tools, (800) 445-0077, www.amanatool.com, In-Stile and Rail System: ogee, #55436; bead, #55437; or concave, #55433; $155.

Back to Well-Equipped Shop Index

Click here to read the rest of the article from American Woodworker