American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Adjustable Square Fergus Falls MN

There's lots of ways it can be used in a shop, from laying out angled cuts on plywood to setting a tablesaw's miter gauge to tilting a bandsaw's table. Meant for outdoor use, this layout tool is very ruggedly built from solid aluminum alloy.

The Home Depot
(218)736-4234
2025 Lincoln Avenue West
Fergus Falls, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Kmart 9537 / Cross Merch
(218) 739-4454
1403 W Lincoln Ave
Fergus Falls, MN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Everts Do it Best Lumber
(218) 864-5983
205 Lake Ave South
Battle Lake, MN
 
The Home Depot
(218)829-0341
7207 Foley Road
Baxter, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Woodcraft - Minneapolis, MN
(952) 884-3634
9125 Lyndale Ave. South
Bloomington, MN

Data Provided by:
Fastenal- Fergus Falls
218-736-2220
504 South Concord Fergus Falls, MN, 56537
Fergus Falls, MN
 
Fergus Falls-Auth Hometown
(218) 736-5404
211 W Lincoln Ave
Fergus Falls, MN
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:8.5-17.5
Tue:8.5-17.5
Wed:8.5-17.5
Thu:8.5-17.5
Fri:8.5-17.5
Sat:8-17
Sun:11-15
Store Features
Mon:8.5-17.5
Tue:8.5-17.5
Wed:8.5-17.5
Thu:8.5-17.5
Fri:8.5-17.5
Sat:8-17
Sun:11-15

Ashby Hardware Hank
(218) 747-2869
102 Melby Ave
Ashby, MN

Data Provided by:
The Home Depot
(218)759-4007
2425 Middle School Dr NW
Bemidji, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(952)368-0281
300 Pioneer Trail E
Chaska, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Adjustable Square

Adjustable Square

 

    

Carpenters and woodworkers: we both share the same love of good tools, don't we? Here's an exquisitely well-engineered carpenter's rafter square that just might find a home in your cabinetmaking workshop. It's called the “Pivot Square” because the long side of the triangle opens out and pivots from 45 to 90 degrees. The scale reads out in single degrees, and is a lot easier to read than the protractor head that goes on a combination square. There's lots of ways it can be used in a shop, from laying out angled cuts on plywood to setting a tablesaw's miter gauge to tilting a bandsaw's table. Meant for outdoor use, this layout tool is very ruggedly built from solid aluminum alloy. Designed for precise work, its right angle is accurate to within 1/20-degree, and the pivot point has no slop. Just in case you need to build a new shop, it comes with an excellent guide to roof construction and framing.

Source
C. H. Hanson, www.chhanson.com (800) 827-3398, Pivot Square, $85.


Click here to read the rest of the article from American Woodworker