American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Adjustable Square Winsted CT

There's lots of ways it can be used in a shop, from laying out angled cuts on plywood to setting a tablesaw's miter gauge to tilting a bandsaw's table. Meant for outdoor use, this layout tool is very ruggedly built from solid aluminum alloy.

The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Berkshire Products, Inc.
(413) 229-7919
884 Ashley Falls Rd PO Box 591
Sheffield, MA

Data Provided by:
Lowe's
(860) 618-4273
420 Winsted Road
Torrington, CT
Hours
M-SA 6 am - 10 pm
SU 7 am - 8 pm

Montana's Hardware Inc
(860) 658-1085
1414 Hopmeadow St
Simsbury, CT
 
The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Park Place Hardware
(860) 379-4274
11 Park Pl
Winsted, CT
 
Goshen Hardware Inc
(860) 491-3087
59 Torrington Rd
Goshen, CT
 
True Value Home Hdw.&gnd.center
(860) 651-5646
16 Railroad St
Simsbury, CT
 
Data Provided by:

Adjustable Square

Adjustable Square

 

    

Carpenters and woodworkers: we both share the same love of good tools, don't we? Here's an exquisitely well-engineered carpenter's rafter square that just might find a home in your cabinetmaking workshop. It's called the “Pivot Square” because the long side of the triangle opens out and pivots from 45 to 90 degrees. The scale reads out in single degrees, and is a lot easier to read than the protractor head that goes on a combination square. There's lots of ways it can be used in a shop, from laying out angled cuts on plywood to setting a tablesaw's miter gauge to tilting a bandsaw's table. Meant for outdoor use, this layout tool is very ruggedly built from solid aluminum alloy. Designed for precise work, its right angle is accurate to within 1/20-degree, and the pivot point has no slop. Just in case you need to build a new shop, it comes with an excellent guide to roof construction and framing.

Source
C. H. Hanson, www.chhanson.com (800) 827-3398, Pivot Square, $85.


Click here to read the rest of the article from American Woodworker