American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Align Bandsaw Wheels Sandusky OH

If you use a sharp blade designed for resawing,compensate for drift angle, set the proper tension and still get bad resawing results, there's only one other possibility:Your wheels need alignment. Pop the hood (well, the wheel covers) onyour saw and put a straightedge across the rim of both wheels (Photo1).

The Home Depot
(419)626-6493
715 Crossings Road
Sandusky, OH
Hours
Mon-Thur: 7:00am-9:00pm
Fri-Sat: 7:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Sandusky
419-621-8228
3501 Venice Road Sandusky, OH, 44870
Sandusky, OH
 
Lowe's
(419) 624-6000
5500 Milan Road - Space 304
Sandusky, OH
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Gordon Lumber Company
(419) 433-2442
902 Taylor Avenue
Huron, OH
 
Bellevue Ace Hardware
(419) 483-2920
220 W Main St, Basset's Market
Bellevue, OH
 
Sandusky Mall
(419) 627-4700
4314 Milan Rd
Sandusky, OH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:11-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:11-18

LOWE'S OF SANDUSKY, OH.
419 624-6000
5500 MILAN RD. - SPACE 304 SANDUSKY, OH, 44870
Sandusky, OH
 
Huron Cement Products Co.
(419) 433-4161
617 Main St
Huron, OH
 
Ace Hardware
(419) 433-4797
402 Cleveland Rd E, Dairy Queen in Commerce Plaza
Huron, OH
 
Port Clinton Hardware
(419) 734-9243
1608 E Perry St, Next to McDonalds / Port Clinton
Port Clinton, OH
 

Align Bandsaw Wheels

Align Bandsaw Wheels

Q. I've tried everything to get good resaw results on my bandsaw, but the blade still wanders. What gives?

A. If you use a sharp blade designed for resawing, compensate for drift angle, set the proper tension and still get bad resawing results, there's only one other possibility: Your wheels need alignment. Pop the hood (well, the wheel covers) onyour saw and put a straightedge across the rim of both wheels (Photo1). If there's a gap, your wheels are not operating in the same plane. Misaligned wheels are a problem for bandsaws with crowned wheels. If your saw is 16" or smaller, chances are it has crowned wheels. A crowned wheel has a slight hump where the blade rides. The crown is designed to force the blade toward the center of the wheel and aid intracking the blade. If the two crowned surfaces are not in the same plane, they pull against each other, robbing the saw of power and accuracy. Fortunately, the problem is easy to fix on most saws. First, measure the misalignment (Photo 2). Next, remove the blade and the wheel and apply the appropriate shim(s) (Photo 3). Most saws have thin washers behind each wheel. You may find removing the stock washer and replacing it with a thicker one is just the ticket. Reattach the wheel and give your saw a spin. Note: Some saws have an adjustable bottom wheel. Just loosen the setscrew and slide the bottom wheel in or out the appropriate amount.

PHOTO 1
Check the wheel alignment with your resaw blade mounted and tensioned. It may be necessary to adjust the tracking of the upper wheel to make the faces of both rims parallel.



PHOTO 2

Measure the gap with a ruler calibrated to at least 1/32" or with a dial caliper.



PHOTO 3:
Remove the wheel and add or subtract shims to eliminate the gap.


Click here to read the rest of the article from American Woodworker