American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

All-Inclusive Slot Cutter Set Grants Pass OR

Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot. Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters.

Grants Pass - Auth Hometown
(541) 471-9489
1551 Northeast F St
Grants Pass, OR
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:10-16
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:10-16

Farner Building Supply
541-244-2428
1741 Dowell Rd Grants Pass, OR, 97527
Grants Pass, OR
 
Fastenal- Grants Pass
541-472-1746
1470 SE M St Suite 2A Grants Pass, OR, 97526
Grants Pass, OR
 
Main Building Supply
(541) 582-0577
Main & Broadway, Corner of Main and Broadway
Rogue River, OR
 
Northwest Timber
(541) 327-1000
3229 Jefferson-Scio Dr, SEPO Box 1010
Jefferson, OR

Data Provided by:
Farmers Building Supply, Inc
(541) 476-0851
1741 Dowell Rd
Grants Pass, OR
 
Fields Home Center
(541) 862-2111
5285 Williams Hwy, Murphy
Grants Pass, OR
 
Farmer's Do it Best Feed & Pet
(541) 476-0402
1741 Dowell Rd
Grants Pass, OR
 
Goby Walnut Products
(503) 477-6744
5315 NW St. Helens Rd.
Portland, OR

Data Provided by:
The Home Depot
(503)639-3500
14800 SW Sequoia Parkway
Tigard, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

All-Inclusive Slot Cutter Set

All-Inclusive Slot Cutter Set

    

CMT's slot cutter set, $160, provides a complete slot cutting package.  With four arbors, seven cutters, seven bearings, and a handful of shims, this set can create slots with different depths and widths, tongue and groove joints, lock rabbets, and more. The four arbors allow you to stack the cutters in a variety of configurations.   Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot.  Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters. The four bearings range in size from 3/4-in. to 1-1/4-in diameter and can be used to create slots from 5/16-in. to 9/16-in. deep.

Source
CMT USA, (888) 268-2487, www.cmtusa.com, Slot Cutter Set, #823001, $160


Click here to read the rest of the article from American Woodworker