American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

All-Inclusive Slot Cutter Set Johnston RI

Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot. Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters.

The Home Depot
(401)823-5173
700 Centre Of N E Blvd
Coventry, RI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Mt. Pleasant True Value Hdw.
(401) 351-7200
249 Academy Ave
Providence, RI
 
Lowe's
(401) 275-2250
247 Garfield Avenue
Cranston, RI
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Kamco True Value
(401) 463-5266
37 Amflex Dr
Cranston, RI
 
Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
Hardware On The Square True Value
(401) 831-1400
1911 Westminster St
Providence, RI
 
Lowe's
(401) 215-1596
1703 Mineral Springs Avenue
North Providence, RI
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Durfee True Value Hdw.
(401) 461-0800
65 Rolfe Sq
Cranston, RI
 
Standard Do it Best Hardware
(401) 438-1420
360 Taunton Ave
East Providence, RI
 
Data Provided by:

All-Inclusive Slot Cutter Set

All-Inclusive Slot Cutter Set

    

CMT's slot cutter set, $160, provides a complete slot cutting package.  With four arbors, seven cutters, seven bearings, and a handful of shims, this set can create slots with different depths and widths, tongue and groove joints, lock rabbets, and more. The four arbors allow you to stack the cutters in a variety of configurations.   Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot.  Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters. The four bearings range in size from 3/4-in. to 1-1/4-in diameter and can be used to create slots from 5/16-in. to 9/16-in. deep.

Source
CMT USA, (888) 268-2487, www.cmtusa.com, Slot Cutter Set, #823001, $160


Click here to read the rest of the article from American Woodworker