American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

All-Inclusive Slot Cutter Set Knightdale NC

Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot. Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters.

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Klingspor’s Woodworking Shop of Raleigh
(919) 876-0707
3141 Capital Blvd.Capital Square
Raleigh, NC

Data Provided by:
The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)562-2202
11915 Retail Drive
Wake Forest, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)878-8771
4901 Capital Blvd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
Data Provided by:

All-Inclusive Slot Cutter Set

All-Inclusive Slot Cutter Set

    

CMT's slot cutter set, $160, provides a complete slot cutting package.  With four arbors, seven cutters, seven bearings, and a handful of shims, this set can create slots with different depths and widths, tongue and groove joints, lock rabbets, and more. The four arbors allow you to stack the cutters in a variety of configurations.   Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot.  Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters. The four bearings range in size from 3/4-in. to 1-1/4-in diameter and can be used to create slots from 5/16-in. to 9/16-in. deep.

Source
CMT USA, (888) 268-2487, www.cmtusa.com, Slot Cutter Set, #823001, $160


Click here to read the rest of the article from American Woodworker