American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

All-Inclusive Slot Cutter Set Newberg OR

Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot. Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters.

The Home Depot
(503)925-8447
20260 SW Pacific Hwy
Sherwood, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)639-3500
14800 SW Sequoia Parkway
Tigard, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rockler Woodworking and Hardware #17
(503) 672-7266
Beaverton Town Square Mall
Beaverton (Portland), OR

Data Provided by:
R and K Woodworking Rare and Exotic Wood
(503) 330-1155
1913 D Street
Forest Grove, OR

Data Provided by:
Columbia Riverwood
(503) 224-9924
1017 SW Morrison St P.O. Box 10461
Portland, OR

Data Provided by:
The Home Depot
(503)693-9090
1950 SE Minter Bridge Rd
Hillsboro, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodcraft - Portland, OR
(503) 684-1428
12020 SW Main Street
Tigard, OR

Data Provided by:
The Home Depot
(503)469-4242
4401 Southwest 110th Ave
Beaverton, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(503)646-1525
13700 NW Science Pk Dr
Portland, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Gilmer Wood Company
(503) 274-1271
2211 NW Saint Helens Road
Portland, OR

Data Provided by:
Data Provided by:

All-Inclusive Slot Cutter Set

All-Inclusive Slot Cutter Set

    

CMT's slot cutter set, $160, provides a complete slot cutting package.  With four arbors, seven cutters, seven bearings, and a handful of shims, this set can create slots with different depths and widths, tongue and groove joints, lock rabbets, and more. The four arbors allow you to stack the cutters in a variety of configurations.   Mount a single cutter and bearing for conventional slot cutting or, using the longer arbor, stack up a number of cutters for making a very wide slot.  Using a countersunk bolt the cutters can be mounted at the end of the arbor to allow undercutting, as you would with a lock rabbet joint. The cutter set includes one 1/16-in., one 1/8-in., one 5/32-in., one 3/16-in., and three 1/4-in. cutters. The four bearings range in size from 3/4-in. to 1-1/4-in diameter and can be used to create slots from 5/16-in. to 9/16-in. deep.

Source
CMT USA, (888) 268-2487, www.cmtusa.com, Slot Cutter Set, #823001, $160


Click here to read the rest of the article from American Woodworker