American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

American Woodworker Router Table Gladstone MO

In this article we’ll show you how to build flatness into your top and keep it there. Read on the article and follow the steps and pictures to build your own woodworker router table.

The Home Depot
(816)459-9950
4949 Old Pike Rd
Gladstone, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(816)741-2580
8900 NW Skyview Avenue
Kansas City, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(816)931-7434
111 E Linwood Blvd
Kansas City, MO
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(913)789-8899
5700 Antioch
Merriam, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(913)648-7811
9600 Metcalf Ave
Overland Park, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(816)415-2269
8598 N Church Rd
Kansas City, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Elmwood Reclaimed Timber
(816) 532-0300
1405 NW 134th Street
Smithville, MO

Data Provided by:
The Home Depot
(816)478-3300
4210 S Lees Summit Rd
Independence, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Lenexa/Kansas City, KS
(913) 599-2800
8645 Bluejacket Road
Lenexa, KS

Data Provided by:
Home Depot
(816) 767-8807
4707 E Bannister Rd
Kansas City, MO
 
Data Provided by:

American Woodworker Router Table

American Woodworker Router Table

By Dave Munkittrick

You won’t find this router table in any store or catalog. But, it incorporates all the best features found in those store-bought systems at half the cost! At AW we’ve had the opportunity to study and use most of the router-table systems on the market. From that experience we’ve designed our own fully featured, easy-to-build router table. Commercial cabinet-based tables sell for $400 to $500; you can build ours for a little more than $200. You’ll save enough to buy yourself a new router!

We've also designed a router lift to go with this table. To see this article, go to AWRouterLift.

The All-Important Fence

At the heart of any great router-table system lies a well-designed fence. Ours offers all the best features identified in our router table tool test (AW #92, February 2002, page 64):
• An easy-to-use, tool-free fence can be set and adjusted in an instant (Photo 1).
• Easy-to-make sacrificial subfences can be adjusted for any size bit or used to create zero-clearance openings (Photo 2). They’re easy to make from plain old 3/4-in. MDF.
• Quick, rock-solid fence settings are made possible by T-tracks in the table (Photo 3). For fine adjustments, leave one hold-down tight to create a pivot point for the fence.
• Fence-mounted T-track for attaching accessories (Photo 3).
• A dust port for picking up the debris that routers kick out.

Photo 1: A totally tool-free fence. Forget about wrenches, screwdrivers or clamps for fence adjustments.

Photo 2: Easy-to-make, sacrificial subfences allow you to make a zero-clearance opening for super-clean, super-safe cuts. Simply slide the infeed fence slowly into the spinning bit.

Photo 3: T-tracks provide slide-and-lock adjustments for maximum versatility. They make for super-smooth fence adjustments and convenient attachment points for accessories.

The Sag-Free Top

In this article we’ll show you how to build flatness into your top and keep it there. Our top’s features include:
• A dead-flat top that will never sag because it’s supported by braces built into the cabinet (Fig. A).
• A versatile offset router mount puts the router near the front edge for easy access and easy stock feeding. This is where you’ll do 90 percent of your routing. The other 10 percent will be at the back of the table, which offers more table support for routing large stock, such as door panels (Photo 4).
• Plastic laminate for a slick, durable top. We put the laminate  on both surfaces to protect and stiffen the top.
• Our Best Buy router-mounting plate (from AW #85, February 2001, Tool Test: Router Table Plates, page 86) allows easy removal of the router for bit changes and hand-held work.

Photo 4: You can work at the back of the table to take advantage of the large setback to support big stock, like this door...

Click here to read the rest of the article from American Woodworker