American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Better Winding Sticks Barre VT

Winding sticks are very useful for gauging twist in a board, but they’re difficult to read. My improved version of these time-tested helpers makes the twist stand out. I start with a pair of straight, flat 2-in.-wide sticks made from 3/4-in.-thick light-colored wood.

Barre - Auth Hometown
(802) 479-2541
1598 Us Route 302 Berlin
Barre, VT
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:8-17
Sun:10-15
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:8-17
Sun:10-15

Harrys Hardware
(802) 563-2291
3087 Main St
Cabot, VT
 
Waitsfield True Value
(802) 496-2496
Village Square Shopping Center
Waitsfield, VT
 
Farm N Country Hardware
(802) 433-1158
2383 Vermont Rte 14
Williamstown, VT

Data Provided by:
Kenyons True Value
(800) 642-7392
93 N Main Street
Northfield, VT

Data Provided by:
Kenyons True Value
(802) 485-9676
93 N Main St
Northfield, VT
 
Kenyons Variety
(802) 496-3922
3337 Main St
Waitsfield, VT
 
Waterbury True Value
(802) 244-8905
838 Waterbury Stowe Rd
Waterbury, VT
 
Builder Specialties
(802) 223-5583
92 River St.
Montpelier, VT
 
Harry's Hardware
(800) 642-7392
3087 Main Street
Cabot, VT

Data Provided by:
Data Provided by:

Better Winding Sticks

Better Winding Sticks

Winding sticks are very useful for gauging twist in a board, but they’re difficult to read. My improved version of these time-tested helpers makes the twist stand out. I start with a pair of straight, flat 2-in.-wide sticks made from 3/4-in.-thick light-colored wood. Then I stain both of them dark—the darker, the better.When the stain is dry, I cut shallow rabbets in both faces at the top of both sticks. This exposes a ribbon of light-colored wood above the stained surface on each face.

To cut the rabbets, set the blade’s height to 1/2 in. and the rip fence 1/32 in. narrower than the stick. Rip all four rabbets from this setting.  Joint the top edge of one board to remove the stain. Then rip this board narrower by the width of the rabbet on the other board. That’s all there is to it. During use, the narrow stick goes in front. Any twist in the board shows as a dark-colored wedge between the top of the rabbet on the near stick and the bottom of the rabbet on the far stick. 

Click here to read the rest of the article from American Woodworker