American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Better Winding Sticks Liberal KS

Winding sticks are very useful for gauging twist in a board, but they’re difficult to read. My improved version of these time-tested helpers makes the twist stand out. I start with a pair of straight, flat 2-in.-wide sticks made from 3/4-in.-thick light-colored wood.

Westlake Ace Hardware
(620) 624-1599
1601 N Kansas Ave
Liberal, KS
 
Mead Lumber
(620) 624-3885
2000 N Kansas Ave
Liberal, KS
 
The Home Depot
(620)231-0831
3001 N Broadway
Pittsburg, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(620)728-0460
1907 E 17th Avenue
Hutchinson, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(913)789-8899
5700 Antioch
Merriam, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Liberal
620-626-6007
832 E. Pancake Blvd Liberal, KS, 67901
Liberal, KS
 
Liberal -Auth Hometown
(620) 624-6200
1010 S Kansas Ave Ste 7
Liberal, KS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:13-18
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:13-18

The Home Depot
(785)749-2074
1910 W 31st Street
Lawrence, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Lenexa/Kansas City, KS
(913) 599-2800
8645 Bluejacket Road
Lenexa, KS

Data Provided by:
The Home Depot
(785)625-0044
1310 E 41st Street
Hays, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Better Winding Sticks

Better Winding Sticks

Winding sticks are very useful for gauging twist in a board, but they’re difficult to read. My improved version of these time-tested helpers makes the twist stand out. I start with a pair of straight, flat 2-in.-wide sticks made from 3/4-in.-thick light-colored wood. Then I stain both of them dark—the darker, the better.When the stain is dry, I cut shallow rabbets in both faces at the top of both sticks. This exposes a ribbon of light-colored wood above the stained surface on each face.

To cut the rabbets, set the blade’s height to 1/2 in. and the rip fence 1/32 in. narrower than the stick. Rip all four rabbets from this setting.  Joint the top edge of one board to remove the stain. Then rip this board narrower by the width of the rabbet on the other board. That’s all there is to it. During use, the narrow stick goes in front. Any twist in the board shows as a dark-colored wedge between the top of the rabbet on the near stick and the bottom of the rabbet on the far stick. 

Click here to read the rest of the article from American Woodworker