American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Big Jointer for Big Work Ballwin MO

With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795.

The Home Depot
(636)207-8875
13929 Manchester Rd
Ballwin, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - St. Louis/Maryland Heights
(314) 993-0413
2077 Congressional Drive
St. Louis, MO

Data Provided by:
The Home Depot
(636)922-1281
6190 Mid River Mall Dr
St Peter, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)936-9494
3891 Mexico Rd
Saint Charles, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)287-1111
3865 Vogel Rd
Arnold, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(636)536-0675
390 Thf Boulevard
Chesterfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)909-7771
10890 Sunset Hills Plaza
Saint Louis, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)647-6050
1603 S Hanley Rd
Brentwood, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)733-1534
8901 Page Avenue
Overland, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(314)291-5288
11215 St Charles Rock Rd
Bridgeton, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Big Jointer for Big Work

Big Jointer for Big Work

    

If you're a woodworker who needs a machine large enough to face joint 12-in. material, the new Grizzly G0609 jointer, $1,695, could be just what you're looking for. With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795. The parallelogram tables are controlled by handwheels, which typically offer finer control than levers.  The fence, 5-1/2-in. tall and 46-3/4-in. long, tilts 45 degrees in both directions, with positive stops at 45, 90, and 135 degrees.  The machine comes with a 5-in. dust port.  Plan on having some friends over when this machine arrives, since it weighs a beefy 875 lbs.

Source
Grizzly Industrial, (800) 523-4777, www.grizzly.com G0609 12-in. jointer, $1,695.


Click here to read the rest of the article from American Woodworker