American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Big Jointer for Big Work Fallon NV

With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795.

Big R
(775) 423-8555
3325 Reno Hwy
Fallon, NV
 
Louie's Home Center
(775) 423-7008
1855 W Williams Ave, Jerry's Restruant
Fallon, NV
 
The Home Depot
(775)851-6000
1001 Steamboat Pkwy
Reno, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(702)642-2600
1275 W Craig Rd
North Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(702)270-6446
7015 Arroyo Crossing Pky
Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Fallon - Auth Hometown
(775) 423-2629
1430 W Williams Ave
Fallon, NV
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16

The Home Depot
(775)751-6004
301 N Hwy 160
Pahrump, NV
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(775)267-3434
921 Jacks Valley Road
Carson City, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(702)870-9600
861 S Rainbow Blvd
Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)738-0455
2955 Mountain City Hwy
Elko, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Big Jointer for Big Work

Big Jointer for Big Work

    

If you're a woodworker who needs a machine large enough to face joint 12-in. material, the new Grizzly G0609 jointer, $1,695, could be just what you're looking for. With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795. The parallelogram tables are controlled by handwheels, which typically offer finer control than levers.  The fence, 5-1/2-in. tall and 46-3/4-in. long, tilts 45 degrees in both directions, with positive stops at 45, 90, and 135 degrees.  The machine comes with a 5-in. dust port.  Plan on having some friends over when this machine arrives, since it weighs a beefy 875 lbs.

Source
Grizzly Industrial, (800) 523-4777, www.grizzly.com G0609 12-in. jointer, $1,695.


Click here to read the rest of the article from American Woodworker