American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Big Jointer for Big Work Marshalltown IA

With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795.

Fastenal- Marshalltown
641-752-9674
1309 Industrial Blvd Suite B Marshalltown, IA, 50158
Marshalltown, IA
 
Spahn & Rose Lumber Co.
(641) 752-1541
110 W Madison
Marshalltown, IA
 
True Value Hardware
(641) 486-2268
Center & Union
Union, IA
 
True Value Hardware
(800) 642-7392
Center & Union
Union, IA

Data Provided by:
Scandinavian Woodshop /Sawmill
(515) 548-3449
2835 Baxter Avenue
Somers, IA

Data Provided by:
Kmart 7583 / Cross Merch
(641) 753-0945
1720 S Center St
Marshalltown, IA
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Marshalltown -Auth Hometown
(641) 752-8888
507 Iowa Ave W
Marshalltown, IA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12-17

Spahn & Rose Lumber Co.
(641) 484-3060
207 State St.
Tama, IA
 
Wilkerson Hardware
(800) 642-7392
129 E High St
Toledo, IA

Data Provided by:
The Home Depot
(515)221-2233
3700 University Ave
West Des Moines, IA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Big Jointer for Big Work

Big Jointer for Big Work

    

If you're a woodworker who needs a machine large enough to face joint 12-in. material, the new Grizzly G0609 jointer, $1,695, could be just what you're looking for. With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795. The parallelogram tables are controlled by handwheels, which typically offer finer control than levers.  The fence, 5-1/2-in. tall and 46-3/4-in. long, tilts 45 degrees in both directions, with positive stops at 45, 90, and 135 degrees.  The machine comes with a 5-in. dust port.  Plan on having some friends over when this machine arrives, since it weighs a beefy 875 lbs.

Source
Grizzly Industrial, (800) 523-4777, www.grizzly.com G0609 12-in. jointer, $1,695.


Click here to read the rest of the article from American Woodworker