American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Big Jointer for Big Work Peoria AZ

With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795.

The Home Depot
(623)376-6735
25650 N Lke Pleasant Pky
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)412-1750
9201 W Peoria Ave
Peoria, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)487-7357
5902 W Peoria Ave
Glendale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodworkers Source - Store #3
(800) 423-2450
18115 N. Black Canyon Highway
Phoenix, AZ

Data Provided by:
The Home Depot
(623)772-1034
9969 W Camelback Road
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Home Depot Store 0453
(623) 412-1750
9201 W. Peoria
Peoria, AZ
 
The Home Depot
(623)486-1550
6880 W Bell Rd
Glendale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)544-1129
13760 W Bell Rd
Surprise, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(602)548-9600
2650 W Thunderbird Rd
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(623)849-0125
4848 N 43rd Avenue
Phoenix, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Big Jointer for Big Work

Big Jointer for Big Work

    

If you're a woodworker who needs a machine large enough to face joint 12-in. material, the new Grizzly G0609 jointer, $1,695, could be just what you're looking for. With a 12 x 84-in. bed, this giant looks more like an aircraft carrier than a jointer. The G0609 has a four-knife cutterhead driven by a 3-hp (18-amp) 220-volt motor. Knife elevation is controlled by jackscrews. You can get a helical carbide-insert cutterhead instead of the four-knife head for an additional $795. The parallelogram tables are controlled by handwheels, which typically offer finer control than levers.  The fence, 5-1/2-in. tall and 46-3/4-in. long, tilts 45 degrees in both directions, with positive stops at 45, 90, and 135 degrees.  The machine comes with a 5-in. dust port.  Plan on having some friends over when this machine arrives, since it weighs a beefy 875 lbs.

Source
Grizzly Industrial, (800) 523-4777, www.grizzly.com G0609 12-in. jointer, $1,695.


Click here to read the rest of the article from American Woodworker