American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Bookcase Entertainment Center Madison OH

If you’re like most people, you’d probably like more storage space for your books and collectibles. If you’ve also been looking for a place to put one of the new wide-screen televisions, then this cabinet has everything you desire. The cherry wood and Craftsman-styled details give it a warm traditional look.

The Home Depot
(440)357-0428
9615 Diamond Center Dr
Mentor, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(440)992-7797
3200 Market Place St
Ashtabula, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Madison - Auth Hometown
(440) 428-7327
6656 N Ridge Road
Madison, OH
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16

Valley Bldg.ctr.of Andover,inc
(440) 466-5995
1977 South Broadway
Geneva, OH
 
Crile Road Hardware
(440) 352-3761
7701 Crile Road
Painesville, OH
 
The Home Depot
(440)285-7400
287 Meadowlands Drive
Chardon, OH
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Western Reserve Hardware Store
(440) 428-2950
6455 North Ridge Rd
Madison, OH
 
Central Ace Hardware
(440) 466-3928
44 S Broadway, Center of Historic Downtown Geneva
Geneva, OH
 
Joughin Hardware
(440) 357-5862
23 South State Street
Painesville, OH
 
ABC Supply Co. Inc./Mentor
440-255-9200
8745 Munson Rd. Mentor, OH, 44060
Mentor, OH
 

Bookcase Entertainment Center

Bookcase Entertainment Center

This eye-catcher uses simple biscuit joinery. Its modular design keeps the cabinets easy to handle and install.

by Randy Johnson

Download the PDF.


If you’re like most people, you’d probably like more storage space for your books and collectibles. If you’ve also been looking for a place to put one of the new wide-screen televisions, then this cabinet has everything you desire. The cherry wood and Craftsman-styled details give it a warm traditional look.

This cabinet makes extensive use of biscuit joinery, which keeps assembly of the cabinets and the miters on the baseboard and on the crown straightforward. It’s built in eight main sections (Fig. A, below), each built separately and then jointed together when all are complete. This approach makes it possible to build the large cabinet even in a fairly small shop, as long as you have a large enough area to do final assembly. In the shop where I worked, I found room along the garage door. 

The TV opening in this cabinet is 60 in. wide by 40 in. tall by 21 in. deep. This space is big enough for most of the newer LCD and DLP 50-in. wide-screen projection TVs and even some that are bigger. A word of caution, though: TV dimensions vary widely from model to model. If you plan to build this cabinet, I recommend you buy your TV first or at least get the exact dimensions. Then you can adjust the dimensions of the TV opening, if necessary. Pay particular attention to your TV’s rear ventilation requirements and adjust the dimension on your cabinet as needed.

Lay Out Your Plywood First 

Pick the best looking sheets for the sides of the lower side cabinets and sides of the upper side cabinets (C2, D2). These pieces are arranged on the plywood layout (see Fig. M, below), so the grain matches when the cabinets are assembled. I used birch plywood for the inner parts of the lower cabinet rather than cherry plywood and saved about $250 on materials. When stained, the color of the birch plywood becomes very similar to the stained cherry plywood.

Build the Base Assembly 

1. Assemble the base frame with biscuits and brads (Fig. B, below). The front and back frames (A1, A2) need to be spliced with patches (A3), because the base is more than 8 ft. long. The double stretcher boards (A4) provide support for the ends of the top panels (A5, A6, Photo 1). 

2. When the frame is assembled, add the cherry baseboard (A7, A8, Photo 2).

3. Rout the chamfer on the baseboard (Fig. B, Detail 1, above). 

Build the Lower Center Cabinet

4. Cut out the cabinet bottom, top, sides and partitions (B1, B2, B3, Fig. C, below). 

5. In the side panels, cut a groove for the back (B4, Fig. C, Detail 2).

6. Cut slots for the biscuit joinery. 

7. Edge-band the front edge of the top, bottom and side panels, but not the partitions (see Sources, below). 

8. Sand the inside surface...

Click here to read the rest of the article from American Woodworker