American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Bowl Gouges Woodinville WA

A modern bowl gouge has three parts: a rod, flute and handle. A solid round rod makes the tool very strong. The rod’s flute is generally a deeply cut oval, which improves the tool’s chip-cutting action.

The Home Depot
(425)806-9300
18333 120th Ave NE
Bothell, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(425)885-6358
17777 NE 76th Street
Redmond, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(425)451-7351
325 120th Ave NE
Bellevue, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rockler Woodworking and Hardware #2
(206) 634-3222
3823 Stone Way North
Seattle, WA

Data Provided by:
Home Depot Inc Store 4745
(360) 568-8687
2601 Bickford Ave
Snohomish, WA
 
Hardwoods Supply, Inc.
(425) 883-4733
14515 NE 91st Street
Redmond, WA

Data Provided by:
Home Depot Inc
(425) 806-9300
18333 120th Ave Ne
Bothell, WA
 
The Home Depot
(206)361-9600
11616 Aurora Ave N
Seattle, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(425)267-0337
11915 Highway 99
Everett, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Home Depot
(425) 391-8467
6200 E Lake Sammamish Pkwy Se
Redmond, WA
 
Data Provided by:

Bowl Gouges

Bowl Gouges

All you need to turn a gorgeous bowl is one fine tool.

by Alan Lacer

Bowl turning is a blast! Thanks to advances in lathes and tooling, lots of woodworkers have now discovered how fun it is to turn a hunk of green wood into a beautiful bowl. Start to finish, it only takes a few hours, and the wood is usually free.

Whatever the bowl’s shape, you need one basic tool: a bowl gouge. I’ve been asked countless questions about how to buy a bowl gouge during my 25 years as a professional instructor. There’s a lot of confusion about what a bowl gouge really is, how it’s sized and ground, and which type is best. Here’s what you need to know to get started.

What is a bowl gouge?

A modern bowl gouge has three parts: a rod, flute and handle. A solid round rod makes the tool very strong. The rod’s flute is generally a deeply cut oval, which improves the tool’s chip-cutting action. A bowl gouge usually has a large handle, about 16 in. long, for increased leverage.

A bowl gouge is often confused with a roughing gouge. A roughing gouge is used in spindle work, such as turning a table leg, to remove a blank’s square corners or to cut a cylinder or taper. It should not be used for faceplate work, such as turning a bowl. A roughing gouge has a tang, which isn’t designed to take as much downward pressure as a rod. The tang could bend or break under the larger force involved in turning a bowl.

Bowl gouges are also often confused with detail gouges, which are also called spindle, fingernail or shallow gouges. A detail gouge has a shallower flute than a bowl gouge. A detail gouge is designed for shaping small elements, particularly in spindle work, although it is used in bowl turning for shaping rims, bases and feet.


Flute Shapes

The flute is the inner, milled portion of a bowl gouge’s rod. The flute’s shape varies among manufacturers. Its deep oval may have round or straight sides. Both types are easy to learn how to handle, so it doesn’t really matter which one you get. Individual turners have their favorites, but no single design is a runaway winner.


Bowl Gouge Sizing Systems

Manufacturers use two different, competing systems to size bowl gouges, which can be confusing. In the commonly used English system, a gouge’s size is approximately the width of its flute. In the less commonly used North American system, the gouge’s size is exactly the diameter of the rod (which I think makes a lot more sense). As a result, the same gouge is usually labeled 1/8 in. smaller in the English system than in the North American system. For example, a 1/2-in. gouge in the English system is the same size tool as a 5/8-in. gouge in the North American system. Note which system a dealer uses before you order.


Bowl Gouge Sizes

Bowl gouges are available in a wide range of sizes. You don’t need a whole se...

Click here to read the rest of the article from American Woodworker