American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Carbide Insert Flush-Trim Bit Athens OH

CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35.

C&e True Value Hdw.
(740) 593-7705
470 Richland Ave
Athens, OH
 
Athens - Auth Hometown
(740) 594-8400
743 F2 East State Street
Athens, OH
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:12-17

Lowe's
(740) 589-3750
983 East State Street
Athens, OH
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Saving Hardware
(740) 753-1987
129 W Washington
Nelsonville, OH
 
Dettwiller True Value Lumber
(740) 992-5500
634 E Main St
Pomeroy, OH
 
Crescent & Sprague Supply
(740) 593-8141
751 W Union St
Athens, OH
 
LOWE'S OF ATHENS, OH
740 589-3750
983 EAST STATE STREET ATHENS, OH, 45701
Athens, OH
 
The Plains True Value
(740) 797-2582
70 N Plains Rd Ste 101
The Plains, OH
 
Darby Land Lumber
(740) 767-2762
17 Main Street
Glouster, OH
 
Baum True Value Store
(740) 985-3301
46384 State Rte 248
Chester, OH
 

Carbide Insert Flush-Trim Bit

Carbide Insert Flush-Trim Bit



I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any more. It's an almost-flush-trim bit, because of the cutter's reduced diameter. CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35. But let's do a little math. The carbide inserts are double-edged, so you automatically get two bits for the price of one. That eliminates one $10 sharpening. After you've worn out the second edge, replacement cutters are only $6 per pair, which is like getting two flush-trim bits, because they're double-edged. So the inexpensive replacement knives save you another $20 worth of sharpening. Finally, the carbide used on CMT's insert cutters, as on almost all insert cutters, is higher quality than on noninsert cutters, so it lasts longer. Insert router bits aren't for everyone. They're obviously more expensive than their noninsert counterparts. But if you're a heavy user of router bits, especially if you do lots of work in abrasive material, such as particleboard, MDF or plastic laminate, they pay off in no time.

Source:
CMT, (888) 268-2487, www.cmtusa.com, Double Flute flush-trim bit, 657.692.11, $85, Replacement knives, 790.300.300, $6.

Click here to read the rest of the article from American Woodworker