American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Carbide Insert Flush-Trim Bit Fort Morgan CO

CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35.

Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
The Home Depot
(719)573-7000
102 N Academy Rd
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
The Home Depot
(720)870-8839
6000 South Gun Club Road
Aurora, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)449-4221
1600 29th Street
Boulder, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Carbide Insert Flush-Trim Bit

Carbide Insert Flush-Trim Bit



I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any more. It's an almost-flush-trim bit, because of the cutter's reduced diameter. CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35. But let's do a little math. The carbide inserts are double-edged, so you automatically get two bits for the price of one. That eliminates one $10 sharpening. After you've worn out the second edge, replacement cutters are only $6 per pair, which is like getting two flush-trim bits, because they're double-edged. So the inexpensive replacement knives save you another $20 worth of sharpening. Finally, the carbide used on CMT's insert cutters, as on almost all insert cutters, is higher quality than on noninsert cutters, so it lasts longer. Insert router bits aren't for everyone. They're obviously more expensive than their noninsert counterparts. But if you're a heavy user of router bits, especially if you do lots of work in abrasive material, such as particleboard, MDF or plastic laminate, they pay off in no time.

Source:
CMT, (888) 268-2487, www.cmtusa.com, Double Flute flush-trim bit, 657.692.11, $85, Replacement knives, 790.300.300, $6.

Click here to read the rest of the article from American Woodworker