American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Carbide Insert Flush-Trim Bit Grand Rapids MI

CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35.

Johnson's Workbench - GR
(616) 245-9545
1038 Burton SW
Grand Rapids, MI

Data Provided by:
The Home Depot
(616)975-4440
4646 28th Street, SE
Grand Rapids, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(616)447-0100
2727 Alpine Ave NW
Walker, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

ABC Supply Co. Inc./Grand Rapids
616-241-4848
2601 S. Division Ave. Grand Rapids, MI, 49507
Grand Rapids, MI
 
Rylee's Ace Hardware,Inc
(616) 451-0724
1234 Michigan St NE
Grand Rapids, MI
 
The Home Depot
(616)724-2280
257 54th Street SW
Wyoming, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Grand Rapids, MI
(616) 957-9663
4265 28th Street SE Ste C
Grand Rapids, MI

Data Provided by:
The Home Depot
(616)257-9559
4900 Wilson Ave SW
Grandville, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Modern Do it Best Hardware
(616) 241-2655
1500 Kalamazoo S E
Grand Rapids, MI
 
Grand Rapids - D
(616) 364-6136
4111 North Kent Mall Ne
Grand Rapids, MI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

Data Provided by:

Carbide Insert Flush-Trim Bit

Carbide Insert Flush-Trim Bit



I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any more. It's an almost-flush-trim bit, because of the cutter's reduced diameter. CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35. But let's do a little math. The carbide inserts are double-edged, so you automatically get two bits for the price of one. That eliminates one $10 sharpening. After you've worn out the second edge, replacement cutters are only $6 per pair, which is like getting two flush-trim bits, because they're double-edged. So the inexpensive replacement knives save you another $20 worth of sharpening. Finally, the carbide used on CMT's insert cutters, as on almost all insert cutters, is higher quality than on noninsert cutters, so it lasts longer. Insert router bits aren't for everyone. They're obviously more expensive than their noninsert counterparts. But if you're a heavy user of router bits, especially if you do lots of work in abrasive material, such as particleboard, MDF or plastic laminate, they pay off in no time.

Source:
CMT, (888) 268-2487, www.cmtusa.com, Double Flute flush-trim bit, 657.692.11, $85, Replacement knives, 790.300.300, $6.

Click here to read the rest of the article from American Woodworker