American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Carbide Insert Flush-Trim Bit Monroe GA

CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35.

The Home Depot
(770)266-0550
2150 West Spring Street
Monroe, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(678)425-0220
649 Carl Bethlehem Rd
Winder, GA
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(770)982-6166
1670 Scenic Hwy N
Snellville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)918-9670
1330 Dogwood Dr
Conyers, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Great Oaks Plaza
(770) 267-6980
500 Great Oaks Dr - Ste 7
Monroe, GA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:12-17

The Home Depot
(770)554-0472
4141 Atlanta Highway
Loganville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)945-7176
2120 Hamilton Creek Pkwy
Dacula, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)784-0197
13171 Hwy 142 NW
Covington, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(706)353-6079
1740 Epps Bridge Rd
Athens, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Hill's Ace Hardware & Lumber Center
(770) 466-1991
275 U S Hwy 78
Loganville, GA
 

Carbide Insert Flush-Trim Bit

Carbide Insert Flush-Trim Bit



I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any more. It's an almost-flush-trim bit, because of the cutter's reduced diameter. CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35. But let's do a little math. The carbide inserts are double-edged, so you automatically get two bits for the price of one. That eliminates one $10 sharpening. After you've worn out the second edge, replacement cutters are only $6 per pair, which is like getting two flush-trim bits, because they're double-edged. So the inexpensive replacement knives save you another $20 worth of sharpening. Finally, the carbide used on CMT's insert cutters, as on almost all insert cutters, is higher quality than on noninsert cutters, so it lasts longer. Insert router bits aren't for everyone. They're obviously more expensive than their noninsert counterparts. But if you're a heavy user of router bits, especially if you do lots of work in abrasive material, such as particleboard, MDF or plastic laminate, they pay off in no time.

Source:
CMT, (888) 268-2487, www.cmtusa.com, Double Flute flush-trim bit, 657.692.11, $85, Replacement knives, 790.300.300, $6.

Click here to read the rest of the article from American Woodworker