American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Carbide Insert Flush-Trim Bit Tahlequah OK

CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35.

Masters True Value Hardware
(918) 456-4122
128 N Muskogee Ave
Tahlequah, OK
 
Tahlequah Lumber
(918) 456-2506
1701 Park Hill Road
Tahlequah, OK
 
Lowe's
(918) 708-4000
161 Meadow Creek Drive
Tahlequah, OK
Hours
M-SA 7 am - 9 pm
SU 8 am - 7 pm

Masters True Value Hardware
(800) 642-7392
128 N Muskogee Ave
Tahlequah, OK

Data Provided by:
The Home Depot
(405)737-3410
1600 S Sooner Road
Midwest City, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

LOWE'S OF TAHLEQUAH, OK
918 708-4000
161 MEADOW CREEK DRIVE TAHLEQUAH, OK, 74464
Tahlequah, OK
 
1404 S Muskogee Ave
(918) 431-1717
Ste #7
Tahlequah, OK
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:13-18
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:13-18

Keith True Value
(918) 478-2327
911 S Lee
Fort Gibson, OK
 
The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(580)332-4018
515 J A Richardson Blvd
Ada, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Carbide Insert Flush-Trim Bit

Carbide Insert Flush-Trim Bit



I use a flush-trim bit a lot, particularly for trimming face frames to cabinet sides and parts flush with templates. Unfortunately, after a few sharpenings, it's not a flush-trim bit any more. It's an almost-flush-trim bit, because of the cutter's reduced diameter. CMT's new carbide insert bits, $85, solve this problem, plus a few others. “Whoa!” you say. “85 bucks for a flush-trim bit?” You're right; it's a lot of dough. A comparable noninsert flush-trim bit with a 1/2-in. shank and 1-in. cut length costs around $35. But let's do a little math. The carbide inserts are double-edged, so you automatically get two bits for the price of one. That eliminates one $10 sharpening. After you've worn out the second edge, replacement cutters are only $6 per pair, which is like getting two flush-trim bits, because they're double-edged. So the inexpensive replacement knives save you another $20 worth of sharpening. Finally, the carbide used on CMT's insert cutters, as on almost all insert cutters, is higher quality than on noninsert cutters, so it lasts longer. Insert router bits aren't for everyone. They're obviously more expensive than their noninsert counterparts. But if you're a heavy user of router bits, especially if you do lots of work in abrasive material, such as particleboard, MDF or plastic laminate, they pay off in no time.

Source:
CMT, (888) 268-2487, www.cmtusa.com, Double Flute flush-trim bit, 657.692.11, $85, Replacement knives, 790.300.300, $6.

Click here to read the rest of the article from American Woodworker