American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Chairmaker's Delight Boise ID

This type of tool has a long and venerable history. Before the machine era, chairmakers made their own scraper shaves with a variety of flat, convex and concave bottoms. Antique artisan-made scraper shaves are difficult to find, however. Mass-produced scraper shaves, such as the Stanley 62, are very rare.

The Home Depot
(208)388-8500
3639 E Federal Way
Boise, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Boise, ID
(208) 338-1190
6883 West Overland Road
Boise, ID

Data Provided by:
The Home Depot
(208)887-9699
1100 S Progress
Meridian, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)461-6476
2003 N Cassia St
Nampa, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Norco
(208) 336-1643
1125 West Amity Rd Boise, ID, 83705
Boise, ID
 
The Home Depot
(208) 388-8500
3639 S Federal Way
Boise, ID
 
The Home Depot
(208)375-1186
1200 Milwaukee Street
Boise, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(208)939-7648
2808 E State Street
Eagle, ID
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Thriftway Home Center
(208) 336-7330
2050 Broadway Ave, 2 Blocks south of Garfield Elementary School
Boise, ID
 
Fastenal- Boise
208-363-7155
2506 Orchard Boise, ID, 83705
Boise, ID
 
Data Provided by:

Chairmaker's Delight

Chairmaker’s Delight

    

Imagine a spokeshave that never tears out the grain, no matter which direction you go, and you have the essence of this wonderful new tool, the Veritas Scraper Shave ($59). The Scraper Shave is a straight-handled spokeshave equipped with a scraper blade. As with all scrapers, the cutting edge attacks the wood at a very high angle in order to prevent tearout. You can make a continuous cut the entire length of a curved surface without having to worry about grain direction.
This type of tool has a long and venerable history. Before the machine era, chairmakers made their own scraper shaves with a variety of flat, convex and concave bottoms. Antique artisan-made scraper shaves are difficult to find, however. Mass-produced scraper shaves, such as the Stanley 62, are very rare. My set of artisan-made shaves, which took a long time to assemble, is an essential part of my tool kit. I've also made my own scraper shaves, but now that's no longer necessary. This is a beautifully made tool. I found its straight handles more comfortable to pull than push. Its brass bottom, which is flat, would be easy to file or grind into a slight concave or convex shape to improve the tool's effectiveness on curved surfaces. Unlike most scrapers, the blade is very hard, so it cannot be sharpened with a file. You must use stones or sandpaper.

Source
Lee Valley, (800) 871-8158, www.leevalley.com Veritas Scraper Shave, #05P33.70, $59.


Click here to read the rest of the article from American Woodworker