American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Chairmaker's Delight Middletown RI

This type of tool has a long and venerable history. Before the machine era, chairmakers made their own scraper shaves with a variety of flat, convex and concave bottoms. Antique artisan-made scraper shaves are difficult to find, however. Mass-produced scraper shaves, such as the Stanley 62, are very rare.

The Home Depot
(401)845-5092
878 W Main Road
Middletown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
The Home Depot
(401)823-5173
700 Centre Of N E Blvd
Coventry, RI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

One Stop Bldg Sply Ctr
(401) 847-8460
236 Connell Hwy
Newport, RI
 
St. Angelo Hardwoods, Inc. - Genuine Asian Teak Specialist
(401) 624-3900
490 Eagleville Road
Tiverton, RI

Data Provided by:
Good Wood
(508) 344-7888
1025 Drift Rd
Westport, MA

Data Provided by:
Liberty Cedar, Inc.
(401) 789-6626
325 Liberty Lane
West Kingston, RI

Data Provided by:
Handren's Paint & Hardware
(401) 293-5290
3001 East Main Road
Portsmouth, RI
 
Jamestown True Value
(401) 423-2722
5 Narragansett Ave
Jamestown, RI
 
Data Provided by:

Chairmaker's Delight

Chairmaker’s Delight

    

Imagine a spokeshave that never tears out the grain, no matter which direction you go, and you have the essence of this wonderful new tool, the Veritas Scraper Shave ($59). The Scraper Shave is a straight-handled spokeshave equipped with a scraper blade. As with all scrapers, the cutting edge attacks the wood at a very high angle in order to prevent tearout. You can make a continuous cut the entire length of a curved surface without having to worry about grain direction.
This type of tool has a long and venerable history. Before the machine era, chairmakers made their own scraper shaves with a variety of flat, convex and concave bottoms. Antique artisan-made scraper shaves are difficult to find, however. Mass-produced scraper shaves, such as the Stanley 62, are very rare. My set of artisan-made shaves, which took a long time to assemble, is an essential part of my tool kit. I've also made my own scraper shaves, but now that's no longer necessary. This is a beautifully made tool. I found its straight handles more comfortable to pull than push. Its brass bottom, which is flat, would be easy to file or grind into a slight concave or convex shape to improve the tool's effectiveness on curved surfaces. Unlike most scrapers, the blade is very hard, so it cannot be sharpened with a file. You must use stones or sandpaper.

Source
Lee Valley, (800) 871-8158, www.leevalley.com Veritas Scraper Shave, #05P33.70, $59.


Click here to read the rest of the article from American Woodworker