American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Cube in a Cube Kapaa HI

Crosscut a 3x3x14-in. blank into four cubes. Solid wood is best, so it doesn't look like you put the little cube in the big cube by gluing parts together. Three-in. table-leg stock works well, but you can make the cubes from 2-1/2 in. or smaller stock if you want.

The Home Depot
(808)632-2740
4320 Nuhou Street
Lihue-Kauai, HI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-7:00pm

SPECIALTY LUMBER INC
4568 A LEHUA STREET KAPAA, HI, 96746
Kapaa, HI
 
Kauai Ace Hdwe & Crafts
(808) 245-4091
4100 Rice St
Lihue, HI
 
Kmart 7682 / Cross Merch
(808) 245-7742
4303 Nawiliwili Rd
Lihue, HI
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21
Store Features
Mon:8-22
Tue:8-22
Wed:8-22
Thu:8-22
Fri:8-22
Sat:8-22
Sun:8-21

Eleele Ace Hardware
(808) 335-3184
Eleele Shopping Ctr, 4469 Waialo Rd
Eleele, HI
 
Acacia Koa Source- Hawaiian Scene LLC
(808) 332-8372
2-2475 Kaumuali’i Highway
Kalaheo, Kauai, HI

Data Provided by:
KAPAA ACE HARDWARE
(808) 822-7751
1105 KUHIO HWY
KAPAA, HI
 
Kukui Grove S/C
(808) 246-8301
3-2600 Kaumuall Hwy - Ste J
Lihue, HI
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-21
Sat:9.5-19
Sun:10-18
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-21
Sat:9.5-19
Sun:10-18

Island Ace Hardware
(808) 826-6980
5-4280 Kuhio Hwy, Princeville Shopping Center
Princeville, HI
 
Cummings Tile Inc
(808) 822-7120
6402 Ahele Dr
Kapaa, HI
 
Data Provided by:

Cube in a Cube

Cube In A Cube


“I'm a carver. I've always admired whittled curiosities like balls trapped inside a cage, but never wanted to spend the time to make them. I figured there must be some way to make a similar object with a drill press. Kids play with it like a toy, but it drives adults nuts. They think it's a puzzle. They're sure there's some way to get the little cube out of the big cube. You can't.”

Step1.
Crosscut a 3x3x14-in. blank into four cubes. Solid wood is best, so it doesn't look like you put the little cube in the big cube by gluing parts together. Three-in. table-leg stock works well, but you can make the cubes from 2-1/2 in. or smaller stock if you want.

 

Step 2.                                                                    
Mark centerlines on one face. Mark one corner of every face with a small X. You'll be drilling each hole more than one time.The X's will help register the cube in the same orientation on the drill press.

Step 3.                                                                    
Set your drill press to run at its slowest speed. Arrange the belts so the smallest diameter drive pulley turns the idler pulley. Connect the idler to the largest diameter spindle pulley.

Step 4.                                                                  
Set up your drill press with a 2 in. Forstner bit. (Use a smaller bit with a smaller block.) Position a fence and stop block so the bit drills exactly in the cube's center. Drill one hole about 1/16-in. deep.

Step 5.                                           
Set the bit's depth of cut. Draw a line from the point where a diagonal intersects the hole you made. Adjust the drill press so the bit stops about 1/16 in. above this line. This method works for any size cube and any size hole. (I've drawn the inner cube so you can see how this works.)

Step 6.
Drill holes in the end-grain sides first.

Click here to read the rest of the article from American Woodworker