American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Curved Corner Edging Bennington VT

Templates 1 and 2 (Fig. A, above) produce the curved outside corner on the tabletop and the matching inside on the solid-wood edging. To make the matching templates, you first need to make a one-time pattern to cut the profile on Template 1 (Photo 1). That template’s profile is cut from a 10-in.-square blank that yields an offcut. The offcut in turn is used to make Template 2, ensuring a perfect fit.

The Home Depot
(802)447-9997
121 N Bennington Rd
Bennington, VT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

H. Greenberg & Son Inc.
(802) 442-3131
321 Main Street
Bennington, VT
 
Carr Hardware True Value
(413) 663-6600
192 State Street
North Adams, MA
 
W W Building Supply
(802) 464-3022
Route 100
Wilmington, VT
 
Miles True Value Lbr.
(802) 375-2525
178 Chittenden Dr
Arlington, VT
 
H. Greenberg and Son
802-442-3131
321 Main St. Bennington, VT, 05201
Bennington, VT
 
Hoosick True Value Hardware
(518) 686-7238
21953 Ny 22
Hoosick Falls, NY
 
Deerfield Valley Supply
(802) 464-3364
211 Route 9 W
Wilmington, VT
 
H. Greenberg & Son Inc
(413) 664-4576
1366 Curran Highway
North Adams, MA
 
Stanleys Lumber & Building Supplies
(413) 743-0831
20 N Summer St
Adams, MA
 

Curved Corner Edging

Curved Corner Edging

3 templates produce a flawless round-cornered solid-wood border on a veneer top.

by Jon Stumbrus

Have you ever marveled at large, expensive conference tables with thick, solid edging and curved corners? The center of the table is usually a beautiful veneer surrounded by solid-wood edging that not only looks cool but can stand up to a lot of abuse from chairs. It doesn’t take long for a woodworker’s eye to stray from the beautiful looks to the daunting joinery on those rounded corners. “How did they do that?” we wonder. To cut these parts, big shops use a computer-controlled router that costs more than most luxury cars. Here’s how you can get the same results in your garage shop with a few simple templates and a handheld router. The templates give you an automatic fit between the inside curve of the edging and the outside curve of the tabletop. 

The next challenge is fitting all those edging pieces around the table. I’ve got a neat trick to help you out there as well. 

Although these are not difficult techniques, you must follow the steps carefully to get good results. I used these techniques to make a 26-in. x 50-in. tabletop that has a 1-in.-thick by 2-in.-wide edge (Fig. B, page 75). The techniques can be used on any size of table or edge molding (see also “ Teak Coffee Table ”).

Build the Templates

Templates 1 and 2 (Fig. A, above) produce the curved outside corner on the tabletop and the matching inside on the solid-wood edging. To make the matching templates, you first need to make a one-time pattern to cut the profile on Template 1 (Photo 1). That template’s profile is cut from a 10-in.-square blank that yields an offcut. The offcut in turn is used to make Template 2, ensuring a perfect fit.

To make the one-time pattern, use a compass to lay out the corner arc radius you desire on a 10-in.-square piece of 3/8-in. MDF. Saw and sand the corner to final shape. Attach the pattern with screws to another 10-in. square of 3/8-in.-thick MDF. Use a 3/8-in.-dia. bottom-bearing flush-trim bit to cut out Template 1 on the router table (Photo 1). Add guide strips to the sides to complete Template 1. 

Use the offcut from Template 1 and a 1-1/8-in.-dia. bearing on your 3/8-in.-dia. bit to make Template 2 (Photo 2). Use a corner blank as a spacer to locate the guide strips on the bottom of Template 2 (Fig. C, page 76). The strips center the corner blank in the jig. You’ll need to build a hold-down jig (Fig. D, page 77). Template 2 is used in conjunction with the hold-down jig to rout the curve on the inside of the corner edging. You may have to adjust the cutout and/or the height of the spacer blocks on the jig to accommodate different radii or edging thicknesses.

Template 3 is used to create the outside curve on the hardwood border. Simply saw and sand it to final shape and add guide strips. 

Rout the Parts

Click here to read the rest of the article from American Woodworker