American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Curved Corner Edging Kennesaw GA

Templates 1 and 2 (Fig. A, above) produce the curved outside corner on the tabletop and the matching inside on the solid-wood edging. To make the matching templates, you first need to make a one-time pattern to cut the profile on Template 1 (Photo 1). That template’s profile is cut from a 10-in.-square blank that yields an offcut. The offcut in turn is used to make Template 2, ensuring a perfect fit.

The Home Depot
(770)421-1245
1655 Shiloh Road NW
Kennesaw, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)792-6858
2350 Dallas Hwy
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)591-8663
9037 Hwy 92, Suite 100
Woodstock, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(678)567-1161
1062 Richard D Sailors
Powder Springs, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)439-0707
145 Depot Drive
Hiram, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)917-8425
3355 Cobb Pkwy
Acworth, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)971-2470
3605 Sandy Plains Rd
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)977-9700
4101 Roswell Rd
Marietta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)438-9678
1200 E W Connector SW
Austell, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)432-9930
2450 Cumberland Pkwy
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Curved Corner Edging

Curved Corner Edging

3 templates produce a flawless round-cornered solid-wood border on a veneer top.

by Jon Stumbrus

Have you ever marveled at large, expensive conference tables with thick, solid edging and curved corners? The center of the table is usually a beautiful veneer surrounded by solid-wood edging that not only looks cool but can stand up to a lot of abuse from chairs. It doesn’t take long for a woodworker’s eye to stray from the beautiful looks to the daunting joinery on those rounded corners. “How did they do that?” we wonder. To cut these parts, big shops use a computer-controlled router that costs more than most luxury cars. Here’s how you can get the same results in your garage shop with a few simple templates and a handheld router. The templates give you an automatic fit between the inside curve of the edging and the outside curve of the tabletop. 

The next challenge is fitting all those edging pieces around the table. I’ve got a neat trick to help you out there as well. 

Although these are not difficult techniques, you must follow the steps carefully to get good results. I used these techniques to make a 26-in. x 50-in. tabletop that has a 1-in.-thick by 2-in.-wide edge (Fig. B, page 75). The techniques can be used on any size of table or edge molding (see also “ Teak Coffee Table ”).

Build the Templates

Templates 1 and 2 (Fig. A, above) produce the curved outside corner on the tabletop and the matching inside on the solid-wood edging. To make the matching templates, you first need to make a one-time pattern to cut the profile on Template 1 (Photo 1). That template’s profile is cut from a 10-in.-square blank that yields an offcut. The offcut in turn is used to make Template 2, ensuring a perfect fit.

To make the one-time pattern, use a compass to lay out the corner arc radius you desire on a 10-in.-square piece of 3/8-in. MDF. Saw and sand the corner to final shape. Attach the pattern with screws to another 10-in. square of 3/8-in.-thick MDF. Use a 3/8-in.-dia. bottom-bearing flush-trim bit to cut out Template 1 on the router table (Photo 1). Add guide strips to the sides to complete Template 1. 

Use the offcut from Template 1 and a 1-1/8-in.-dia. bearing on your 3/8-in.-dia. bit to make Template 2 (Photo 2). Use a corner blank as a spacer to locate the guide strips on the bottom of Template 2 (Fig. C, page 76). The strips center the corner blank in the jig. You’ll need to build a hold-down jig (Fig. D, page 77). Template 2 is used in conjunction with the hold-down jig to rout the curve on the inside of the corner edging. You may have to adjust the cutout and/or the height of the spacer blocks on the jig to accommodate different radii or edging thicknesses.

Template 3 is used to create the outside curve on the hardwood border. Simply saw and sand it to final shape and add guide strips. 

Rout the Parts

Click here to read the rest of the article from American Woodworker