American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Digital Caliper Reads in Fractions Cody WY

These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Bloedorn Lumber Bldg Materials
(307) 587-2223
1902 Big Horn Ave
Cody, WY
 
Cody Ace Hardware
(307) 587-8555
2201 17th St, K-Mart and McDonald's
Cody, WY
 
Gambles
(307) 587-4461
1007 12th Street
Cody, WY
 
The Home Depot
(307)362-3716
1925 Foothill Blvd
Rock Springs, WY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(307)472-6505
4900 East 2nd Street
Casper, WY
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Titan Truss
(307) 587-2187
2828 Chopper Lane
Cody, WY
 
Aldrich Home Center Of Cody
(307) 587-2263
308 19th Street
Cody, WY
 
Diamond Concrete Design
(307) 222-4730
721 15th Street, Suite A
Cody, WY
 
The Home Depot
(307)674-6669
2050 Coffeen Avenue
Sheridan, WY
Hours
Mon-Sat: 7:00am-8:00pm
Sun: 8:00am-8:00pm

The Home Depot
(307)686-8128
1105 E Boxelder Road
Gillette, WY
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 7:00am-8:00pm

Digital Caliper Reads in Fractions

Digital Caliper Reads in Fractions

    

Calipers are handy to have in any shop. You can use them to check a board's thickness, a drill bit's diameter or a dado's width. Unfortunately, most calipers are so difficult to decipher that woodworkers avoid using them like they avoid sanding. Stop the presses—I've found the ultimate caliper. It's digital and reads in regular old fractions, something my brain understands pretty well. To use it, you don't have to convert decimal readings, just read the display. It's wonderfully simple, and at $38, it's competitively priced.
These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Source 
The Craftsman Gallery, (866) 966-3728,
www.craftsmangallery.com  Fractional caliper, 4-in., #30-144, $38; 6 in., #30-145, $38.


Click here to read the rest of the article from American Woodworker