American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Digital Caliper Reads in Fractions Essex Junction VT

These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

The Home Depot
(802)872-0039
759 Harvest Lane
Williston, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's of Essex
802-662-9131
10 Sussie Wilson Rd Essex Junction, VT, 05452
Essex Junction, VT
 
Lowe's
(802) 662-9131
10 Susie Wilson Road
Essex Junction, VT
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

Harvey Industries/White River Jct
(802) 295-3700
1354 North Heartland Rd White River Jct, VT, 05495
White River Jct, VT
 
Jerihill Home Center
(802) 899-1277
249 Vt Route 15
Jericho, VT
 
Bibens Ace-Essex
(802) 879-0249
15 Essex Way, Essex Shoppes & Cinema
Essex Junction, VT
 
Essex Equipment
(802) 879-0767
26 Kellogg Road
Essex Junction, VT
 
Harvey Industries/Williston
(802) 660-8111
71 Leroy Road Williston, VT, 05495
Williston, VT
 
Russell Supply
(802) 863-1177
9 Gregory Drive South Burlington, VT, 05407
South Burlington, VT
 
Bibens Ace-So Burlington
(802) 864-1847
1961 Williston Rd
South Burlington, VT
 

Digital Caliper Reads in Fractions

Digital Caliper Reads in Fractions

    

Calipers are handy to have in any shop. You can use them to check a board's thickness, a drill bit's diameter or a dado's width. Unfortunately, most calipers are so difficult to decipher that woodworkers avoid using them like they avoid sanding. Stop the presses—I've found the ultimate caliper. It's digital and reads in regular old fractions, something my brain understands pretty well. To use it, you don't have to convert decimal readings, just read the display. It's wonderfully simple, and at $38, it's competitively priced.
These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Source 
The Craftsman Gallery, (866) 966-3728,
www.craftsmangallery.com  Fractional caliper, 4-in., #30-144, $38; 6 in., #30-145, $38.


Click here to read the rest of the article from American Woodworker