American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Digital Caliper Reads in Fractions Maple Valley WA

These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

The Home Depot
(253)638-0258
27027 185th Ave SE
Covington, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Edensaw Woods
(253) 216-1150
8032 South 194th Street
Kent, WA

Data Provided by:
Home Depot
(425) 391-8467
6200 E Lake Sammamish Pkwy Se
Redmond, WA
 
The Home Depot
(425)391-8467
6200 E Lke Samammish Pky
Issaquah, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodcraft - Seattle
(206) 767-6394
5963 Corson Ave. S.
Seattle, WA

Data Provided by:
The Home Depot
(253)852-1017
26120 104th Avenue SE
Kent, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(206)575-9200
6810 S 180th St
Tukwila, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Rockler Woodworking and Hardware #15
(206) 244-9161
345 Tukwila Parkway
Tukwila, WA

Data Provided by:
The Home Depot
(253)661-9200
1715 S 352nd St
Federal Way, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(425)451-7351
325 120th Ave NE
Bellevue, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Digital Caliper Reads in Fractions

Digital Caliper Reads in Fractions

    

Calipers are handy to have in any shop. You can use them to check a board's thickness, a drill bit's diameter or a dado's width. Unfortunately, most calipers are so difficult to decipher that woodworkers avoid using them like they avoid sanding. Stop the presses—I've found the ultimate caliper. It's digital and reads in regular old fractions, something my brain understands pretty well. To use it, you don't have to convert decimal readings, just read the display. It's wonderfully simple, and at $38, it's competitively priced.
These calipers, available with 4-in. or 6-in. capacity, can be zeroed at any position, which allows you to measure the difference in thickness between two items without doing fractional math. These calipers will read inside or outside dimensions and they have an auto-off feature to prevent the battery from running down. Oh, one more thing: If you like, you can change the display to read in decimals as small as thousandths or in millimeters, allowing you to measure to 1/64 in., .0005 in. or .01 mm.

Source 
The Craftsman Gallery, (866) 966-3728,
www.craftsmangallery.com  Fractional caliper, 4-in., #30-144, $38; 6 in., #30-145, $38.


Click here to read the rest of the article from American Woodworker